4:10s or 3:73s with heads cam nitrous on 26" tire?? - LS1TECH



4:10s or 3:73s with heads cam nitrous on 26" tire??

Reply
 
Thread Tools Search this Thread
Old 09-30-2002, 09:47 AM   #1
LS1Tech Premium Sponsor
Thread Starter
iTrader: (51)
 
Ron@Vengeance's Avatar
 
Join Date: Nov 2001
Location: Cumming GA
Posts: 5,621
Default 4:10s or 3:73s with heads cam nitrous on 26" tire??

Well I finally broke the 10 bolt last night. I actually put the carrier through the diff cover. Wow what a mess. Im getting qa new set up installed today. My question is 4:10s would be bad *** for some street racing and motor passes at the track, but what about on the hose?? I rev to 6700 and run 26ET streets...Will I have to go into 5th in the 1/4 on nitrous?? Could I extend my rev limiter to 6900 or so? TIA

BTW, I know all about 4:10s being weaker, so I dont need that lecture. Gear installs are a dime a dozen around here. I dont mind breaking. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Ron@Vengeance is offline   Reply With Quote
Old 09-30-2002, 02:11 PM   #2
LSX Mechanic
iTrader: (89)
 
Damian's Avatar
 
Join Date: Nov 2001
Location: Atlanta
Posts: 10,375
Default Re: 4:10s or 3:73s with heads cam nitrous on 26" tire??

I coulda answered that question for ya numbnut.. <img border="0" alt="[boring]" title="" src="graemlins/gr_zzz.gif" />

You will definatly go into 5th on the nitrous. Extending your rev limiter and holding it out that far may hurt more than help because your car doesn't make power that high on motor. Gonna need a 28' inch tire....

Josh

<small>[ September 30, 2002, 01:14 PM: Message edited by: Damian ]</small>
Damian is offline   Reply With Quote
Old 09-30-2002, 02:19 PM   #3
TECH Apprentice
 
Scott's Avatar
 
Join Date: Nov 2001
Location: Annapolis, MD
Posts: 343
Default Re: 4:10s or 3:73s with heads cam nitrous on 26" tire??

Yep, 28" tires a must if you go with 4.10s.
Scott is offline   Reply With Quote
Old 09-30-2002, 02:54 PM   #4
TECH Enthusiast
 
nysbadmk8's Avatar
 
Join Date: Apr 2002
Location: Lehighton Pa
Posts: 537
Default Re: 4:10s or 3:73s with heads cam nitrous on 26" tire??

dude... got one good question for ya... your nitrous tourqe number.... its a tad too high to belive.... i dont think you picked up 300rwtq tourqe on a 100 shot

<small>[ September 30, 2002, 02:11 PM: Message edited by: nysbadmk8 ]</small>
nysbadmk8 is offline   Reply With Quote
Old 09-30-2002, 03:54 PM   #5
LS1Tech Premium Sponsor
Thread Starter
iTrader: (51)
 
Ron@Vengeance's Avatar
 
Join Date: Nov 2001
Location: Cumming GA
Posts: 5,621
Default Re: 4:10s or 3:73s with heads cam nitrous on 26" tire??

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by nysbadmk8:
<strong>dude... got one good question for ya... your nitrous tourqe number.... its a tad too high to belive.... i dont think you picked up 300rwtq tourqe on a 100 shot</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Wish I could say I was lying. I have the dyno graph beside me. No spike and no lies. My cam happens to love nitrous. Notice I also make over 400 ft/lbs of torque on motor which isnt all that common either.

Back on subject, I figured I would need a 28" tire, now the question is if its worth all this to go 4:10s...Speak up guys.. How ya liking the steep gears??
Ron@Vengeance is offline   Reply With Quote
Old 09-30-2002, 03:58 PM   #6
TECH Fanatic
 
Join Date: Nov 2001
Location: Freeland, MD
Posts: 1,347
Default Re: 4:10s or 3:73s with heads cam nitrous on 26" tire??

3.73s with a 26", 4.10s with a 28". I myself may be going with a 28" with 3.73s so I don't run out of gear on the spray.
WeatherGuy is offline   Reply With Quote
Old 09-30-2002, 04:08 PM   #7
TECH Enthusiast
 
nysbadmk8's Avatar
 
Join Date: Apr 2002
Location: Lehighton Pa
Posts: 537
Default Re: 4:10s or 3:73s with heads cam nitrous on 26" tire??

700ft lbs... thats amazing
nysbadmk8 is offline   Reply With Quote
Old 09-30-2002, 04:10 PM   #8
TECH Enthusiast
 
nysbadmk8's Avatar
 
Join Date: Apr 2002
Location: Lehighton Pa
Posts: 537
Default Re: 4:10s or 3:73s with heads cam nitrous on 26" tire??

oh btw... i run heads $ cam Nx 100 wet shot

3.73's on 26inch et drags trapping 125-128 still in 3rd gear 6900 redline dont know where it is at the end of the 1/4 tought
nysbadmk8 is offline   Reply With Quote
Old 09-30-2002, 04:11 PM   #9
LS1Tech Premium Sponsor
Thread Starter
iTrader: (51)
 
Ron@Vengeance's Avatar
 
Join Date: Nov 2001
Location: Cumming GA
Posts: 5,621
Default Re: 4:10s or 3:73s with heads cam nitrous on 26" tire??

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by nysbadmk8:
<strong>700ft lbs... thats amazing</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">709 <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Ron@Vengeance is offline   Reply With Quote
Old 09-30-2002, 08:44 PM   #10
LSX Mechanic
iTrader: (89)
 
Damian's Avatar
 
Join Date: Nov 2001
Location: Atlanta
Posts: 10,375
Default Re: 4:10s or 3:73s with heads cam nitrous on 26" tire??

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">dude... got one good question for ya... your nitrous tourqe number.... its a tad too high to belive.... i dont think you picked up 300rwtq tourqe on a 100 shot</font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I was there, definately no bullshit. Ron's car was built strickly with nitrous in mind. HUGE split cam, hogged exhaust ports, etc..It's not hard at all to gain crazy amounts of TQ with a properly setup nitrous combo...

Josh

PS- The car twisted enough on the 75 shot to break the t-top and hit me in the face with it. Got TQ? <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

PSS- I'm done tootin that ********'s horn <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Damian is offline   Reply With Quote
Old 10-01-2002, 08:38 AM   #11
LS1Tech Premium Sponsor
Thread Starter
iTrader: (51)
 
Ron@Vengeance's Avatar
 
Join Date: Nov 2001
Location: Cumming GA
Posts: 5,621
Default Re: 4:10s or 3:73s with heads cam nitrous on 26" tire??

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Damian:
<strong> </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">dude... got one good question for ya... your nitrous tourqe number.... its a tad too high to belive.... i dont think you picked up 300rwtq tourqe on a 100 shot</font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I was there, definately no bullshit. Ron's car was built strickly with nitrous in mind. HUGE split cam, hogged exhaust ports, etc..It's not hard at all to gain crazy amounts of TQ with a properly setup nitrous combo...

Josh

PS- The car twisted enough on the 75 shot to break the t-top and hit me in the face with it. Got TQ? <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />

PSS- I'm done tootin that ********'s horn <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Buahahha, I love you too man. Sorry about that T top, <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Ron@Vengeance is offline   Reply With Quote
Reply


Tags
10s, 373, 373s, 410s, acr, c5, cam, damian, email, heads, nitrous, smalls, tire

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 04:41 AM.