StreetStalkerZ

iTrader: (1)

Welp i scored a new best spinning last saturday. Track prep was awsome so i learned that the pinion angle was to blame for most of my traction problems and a BMR adjustable torque arm is on the way <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> . I have all the bolt ons except ASP pulley and ls6 intake. I'm running the B1 cam,TCS 4200 stall,4.10s and 26x10 ET Drags. Car weight was 3,390 lbs on 1/4 tank of gas with temps in the upper 40s.

60ft. 1.57 <--spinning
1/8th 7.31@93.40
1000ft. NA
1/4 11.52@116.50

My best 60ft. of the night was a 1.56. The car's suspension was unloading after the tires hit from the launch and would spin about 3/4-1 full tire rotation then grab. The stall hits HARD with 4.10s and is in need of suspension dialing in so im sure with the new torque arm and getting the ET Drags to plant solid it should run way into the 11.40s and maybe a high 11.39 if the weather is right. Going to make a few changes and head back in the next week and see how it does <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

LOnSLO

iTrader: (15)

Is that with stock heads? If so, you are hauling *** big time. Congrats <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

PHIL H

iTrader: (13)

Good run..I like your mild combo. The old B1 cam can still hold its own. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

Phil

2MCHPWR

iTrader: (10)

nice time!!
great 60'!
love the B1!! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> <img border="0" alt="[USA]" title="" src="graemlins/patriot.gif" />

2000SILVERTA

Good run Scott, keep plugging away at that ET.


BTW, slept too late to call yesterday. Im thinking my tranny is DEAD. <img border="0" title="" alt="[Frown]" src="gr_sad.gif" />

Coach 02 A3 Z/28

iTrader: (10)

Great stuff. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

Practice is the key my friend. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />

Good luck this weekend racing. <img border="0" alt="[angel]" title="" src="graemlins/gr_angel.gif" />

Coach

Mike Hoffpauir

Sounds Good Scott! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

Once you get the car to hook are you going to put a pully and an ls6 intake on the car?

CHRISPY

Congrats!!
New Torque arm with -3 degrees pinion angle should help with the unloading of the tires <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />

<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

StreetStalkerZ

iTrader: (1)

Stacy,give me a call and i can see if i can hook you up on the tranny rebuild.

Mike,yes i will get the intake and pulley soon along with a better flowing exhaust (3" true dual <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> ) because the stock catback SUCKS!

I was thinking of -2 on the pinion angle but would -3 be the better way?

Yes the car retains stock heads that have never been off and will most likely stay that way for awhile.

Scott

CamaroCain

iTrader: (1)

FINALLY!!! Some TCS converter results. How do you like that Converter? Is this your first converter or did you switch to this one from another converter? I am thinking seriously about going to a TCS, wanting to get the best I can out of my car stock internal. Any info, good or bad about this converter would be greatly appreciated. If you don't want to post it all here you can PM me.

TIA

Lynda

StreetStalkerZ

iTrader: (1)

Lynda,I was running the Vig.3200 and swaped to the TCS 4200. This converter hits alot harder than the Vig. and pulls stronger through the 1/8th mile. My MPH did not go up any but some of that has to do with adding 50lbs to the car. Even though it's pulling a 1.56 60ft. it was spinning and most people can't understand that but the car feels like it was skateing on ice. Like i said earlier there is alot more left at the 60ft. mark with some suspension tweaking and there is another local with the same stall as mine but hits a little softer that has pulled a 1.50 60ft. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> My goal is to get it in the 1.49 range without breaking first lol but this is my 3rd 10 bolt so i already know it is on borrowed time haha! Hey i need a 12 bolt but for $300-$400 for a 10 bolt that will last 8 months out of the year is hard to pass up when the money is not there.

I have nothing but good words to say about derek and his converters and it is showing that there might be a new kid on the block for the LS1 converter world <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

98TAauto

iTrader: (2)

Hot damn!! Its no doubt to me the cam only average will be 11.2-11.4 by next year! It use to take every bit of heads/cam to get low 11's, but times are changin <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

when you get that intake and pulley she gonna atleast be in the 11.3 range man!

looks like im gonna have to go out and get a gear to stay ahead now <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" /> MUAHAHAH LOL

Tim 98z

iTrader: (1)

Dang man you have that car flying! I was going to email yall on Thurs to tell you we were headding to prescott. (last minute thing)But figured you were at the shootout. Glad to see the times man. I got a new setup also that i need to get tuned out and setup right. But hopefully in a month or two ill be hanging with ya. Just with more mods. <img border="0" alt="[cry]" title="" src="graemlins/gr_cry.gif" /> <img border="0" alt="[jester]" title="" src="graemlins/gr_jest.gif" /> You can read my post here in drage race section.

Z-Rated

Im with Lynda, im glad that we have some track results. Ive been saying good things about the TC and i dont run one. Good times Scott your cars hauling! I cant wait to get mine.

Drew

StreetStalkerZ

iTrader: (1)

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by 98TAauto:
<strong> Hot damn!! Its no doubt to me the cam only average will be 11.2-11.4 by next year! It use to take every bit of heads/cam to get low 11's, but times are changin <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

when you get that intake and pulley she gonna atleast be in the 11.3 range man!

looks like im gonna have to go out and get a gear to stay ahead now <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" /> MUAHAHAH LOL </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Crazyfarmer,i hope to be in the 11.39 range with a 1.49 60ft. with some tuning on what i have then slap the intake and pulley on and open up the exhaust more <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

<small>[ April 05, 2003, 07:58 PM: Message edited by: StreetStalkerZ ]</small>

XFiveLiter

Damn you must be pushing 7000 through the traps w/thoes 4.10. <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />

Congrats, I gotta get moving or I'll find myself at the bottom of the cam only list. <img border="0" title="" alt="[Frown]" src="gr_sad.gif" />