tektrans

iTrader: (23)

So is the heater box assembly, air bag etc. Took off the wiper assem/motor etc. Even took out that rubber firewall cover (can't believe how heavy that was).
Fabbed up a galvanized steel plate for the hole that was left.
#8 plug is my favorite now.
I think I'm gonna hang on to the radio for now, drowns out the noisy Moser rear.
Not sure about the bumper supports, I drive on the street. Gonna lose the door braces since I have the roll bar.
Before the dash coming out I weighed in at 3500 with me in it. I'm looking for a 3250 raceweight. I think I made a big leap towards that today.

Coach 02 A3 Z/28

iTrader: (10)

Cool man. I need to do the same to my Dads 01 Z/28.

Coach

kp

iTrader: (34)

Its about 60-70lbs for the heater box/dash insulation/heater hoses and air bags if I remember right. I took all the speakers + the monsoon amp out and rewired the door speakers so both speakers work with just the radio alone. It sounds OK and its better then nothing

Camaro_Zach

iTrader: (19)

www.camarozach.com/dash

if anyone cares to see pics of it removed

mongse

iTrader: (2)

Just chipping in my $.02...

and

jasontaws6

iTrader: (13)

Thats is exactly what i just got done doing. I am going with the harryglass.com dash, it only weighs 3 pounds.

What are you going to do with all your wires.

tektrans

iTrader: (23)

Those pics look familiar

mongse

iTrader: (2)

I'm cutting all the safety (yellow) wires out. I may end up going to a Painless 12-circuit harness to lighten it even more. We'll see.

I'm using a stock dash. I didn't want the VFN dash just yet.