Finally! Longer 12x1.5mm wheel studs
#1
TECH Enthusiast
Thread Starter
Join Date: Nov 2001
Location: AZ
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
Finally! Longer 12x1.5mm wheel studs
I went to my local speedshop on Sunday after failing tech Saturday night(front = Draglites, spacer, 12x1.5mmx2.5" ARP wheel studs) looking for the long GM studs or to maybe going with 1/2" or 5/8" studs. No luck on the GMs but the guy had a new ARP catalog that showed a new 3.25" wheel stud from ARP.
I searched ARP’s website and Googled but couldn't find any info on them. I called ARP and they verified them:
Part number: 100-7713
Knurl dia: 0.509"
Knurl length: 0.315"
Overall length: 3.25" (no nose - threaded to the end)
Thread pitch: 12x1.5mm
Kind of pricey: $20.63/set from Summit (5 in a set)
Summit has them on their website but doesn't list any info about them (what they fit, dimensions, etc). They also show them as on backorder. ARP says they have them in stock. I ordered on Monday and have a “tentative” delivery date of 5/13/05.
I searched ARP’s website and Googled but couldn't find any info on them. I called ARP and they verified them:
Part number: 100-7713
Knurl dia: 0.509"
Knurl length: 0.315"
Overall length: 3.25" (no nose - threaded to the end)
Thread pitch: 12x1.5mm
Kind of pricey: $20.63/set from Summit (5 in a set)
Summit has them on their website but doesn't list any info about them (what they fit, dimensions, etc). They also show them as on backorder. ARP says they have them in stock. I ordered on Monday and have a “tentative” delivery date of 5/13/05.
#3
TECH Enthusiast
Thread Starter
Join Date: Nov 2001
Location: AZ
Posts: 561
Likes: 0
Received 0 Likes
on
0 Posts
I thought the Lingenfelter's were only about 2-5/8" long. These are about the same as the 2.5" long ARPs I have now. Close if I grind my calipers and dump the spacers but not sure if they'd still be long enough.