Drag Racing Tech
Sponsored by:
Sponsored by:

Taking it to the Track

Thread Tools
 
Search this Thread
 
Old 03-27-2006, 10:26 PM
  #1  
12 Second Club
Thread Starter
iTrader: (11)
 
MidwayAvenue's Avatar
 
Join Date: Mar 2006
Location: Daytona Beach Florida
Posts: 355
Likes: 0
Received 1 Like on 1 Post
Default Taking it to the Track

well i'm going to the track friday, mods are listed in sig.. no converter yet...

I have Fuzion ZRI's and i was wondering should i heat them up a good bit before the run???

And how should I launch the car, its an A4, should i try and break hard while pressing on the gas then letting go of the break??? Not to sure, any track info will help , thanks
Old 03-27-2006, 10:32 PM
  #2  
10 Second Club
iTrader: (12)
 
1QuickT-A's Avatar
 
Join Date: Dec 2004
Location: Birmingham, Alabama
Posts: 2,034
Likes: 0
Received 0 Likes on 0 Posts

Default

just barely stall it up enough to take the slack out of the suspension and then launch.. see how that does.. also try leaving from a dead idle..

dont burn the tires off.. just turn them over enough to get the trash off of them and put off a tiny bit of smoke.. that should be plenty..
Old 03-27-2006, 11:37 PM
  #3  
10 Second Club
iTrader: (35)
 
JRracing's Avatar
 
Join Date: Feb 2005
Location: Indiana boy
Posts: 4,174
Likes: 0
Received 0 Likes on 0 Posts

Default

Do not sit there and melt the tires down. It will kill the traction.
Old 03-28-2006, 08:44 AM
  #4  
11 Second Club
 
mvonada's Avatar
 
Join Date: Nov 2005
Location: Shingle Springs, CA
Posts: 447
Likes: 0
Received 0 Likes on 0 Posts
Default

Try different RPM's to launch. My A4 worked best launching at 1,800 RPM's, each car is different.




All times are GMT -5. The time now is 07:46 AM.