Issue with my please. - LS1TECH

Go Back   LS1TECH > RACING DEPARTMENT > Drag Racing Tech
Log In 

Drag Racing Tech
Rules | Safety | Setups | Hardware | Methods
Sponsored by
Scoggin-Dickey Parts Center
Click Here

Issue with my please.

Thread Tools Search this Thread
Old 04-15-2006, 09:59 PM   #1
12 Second Club
black_z's Avatar
Trader Rating: 4
Join Date: May 2003
Location: Midwest
Posts: 3,324
Send a message via AIM to black_z Send a message via MSN to black_z
Default Issue with my please.

Today at Cedar falls my car was acting up. The car hooks very nicely and is making good power, but after every single launch it would bog terribly. A friend of mine's setup is the same as mine except he has an LS6 intake and a tune, he ran a 12.5XX@113.8 compared to my 12.93@109.5, I compared the slips and both 60's were very close (mine 1.99, his 2.0X) but his 1/8th MPH was 3.5 MPH higher and his 1/8 ET were .35 better than mine, if you do the math hes pulling about 4 MPH and .4 total, but .35 and 3.5 MPH are before the 1/8th mile? Is this a tuning issue with my car? I cant figure it out. Both cars are M6's, with stock gears and running on 245/50/16 nittos.
Originally Posted by flyin red TA
But most importantly, could you still see yourself peeing in her butt in 40 years?
black_z is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


All times are GMT -5. The time now is 07:29 PM.