Drag Racing Tech
Sponsored by:
Sponsored by:

Failed 25.5 certification

Thread Tools
 
Search this Thread
 
Old 08-21-2006, 04:45 PM
  #1  
Outlaw 10.5 Director
Thread Starter
iTrader: (9)
 
FSTR-THANU's Avatar
 
Join Date: Nov 2001
Location: Commerce Twp.
Posts: 2,136
Likes: 0
Received 0 Likes on 0 Posts

Default Failed 25.5 certification

Well, Stenod took the Red Rocket over to Skinny Kid Race Cars to get the Chassis certified and it did not pass. I was not there but from what I understand this modification had something to do with the major reason for not passing:





On a more minor side, the trans crossmember diameter is too small, the seat support does not have enough structure, 5 bars need to be added but I need to get more info from Stenod on the exact location and many gussets need to be added. The window net mount needs to be changed as well. If it was not for the #1 bar being wrong the majority of stuff would be relativley easy except for the fact that I need to grind/cut/weld on a "finished" cage and re-paint.

Thanks to Stenod and Skinny Kid for your help this morning!

Tom

Last edited by FSTR-THANU; 08-21-2006 at 09:10 PM.
FSTR-THANU is offline  
Old 08-21-2006, 04:52 PM
  #2  
TECH Fanatic
iTrader: (37)
 
TOSTO RACING's Avatar
 
Join Date: Nov 2001
Location: Wentzville MO
Posts: 1,601
Likes: 0
Received 0 Likes on 0 Posts

Default

That sucks Tom. I was wanting to that car at N vs S.Good luck with getting it lined out.
TOSTO RACING is offline  
Old 08-21-2006, 05:09 PM
  #3  
Outlaw 10.5 Director
Thread Starter
iTrader: (9)
 
FSTR-THANU's Avatar
 
Join Date: Nov 2001
Location: Commerce Twp.
Posts: 2,136
Likes: 0
Received 0 Likes on 0 Posts

Default

Hell or high water, the car should be at the North vs. South.

Tom
FSTR-THANU is offline  
Old 08-21-2006, 05:22 PM
  #4  
LS1Tech Sponsor
iTrader: (4)
 
MADMAN's Avatar
 
Join Date: Jan 2002
Location: At the track
Posts: 5,295
Likes: 0
Received 4 Likes on 4 Posts

Default

That sucks Tom. This is the exact reason myself and NRC and Stenod call each other if we have questions. The new specs are a bitch to interpret.
__________________
www.madmanandcoracing.com


225-343-9029
MADMAN is offline  
Old 08-21-2006, 05:51 PM
  #5  
TECH Fanatic
iTrader: (37)
 
TOSTO RACING's Avatar
 
Join Date: Nov 2001
Location: Wentzville MO
Posts: 1,601
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by FSTR-THANU
Hell or high water, the car should be at the North vs. South.

Tom

Good deal
TOSTO RACING is offline  
Old 08-21-2006, 05:59 PM
  #6  
On The Tree
 
Dave@KTS's Avatar
 
Join Date: Aug 2004
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Default Nice try Tom

Maybe if you would have paid your bill and let us finish
the car it would have passed. Funny how all our other
cars have passed with the NHRA. Thanks for once again
trying to make KTS look bad. You are a piece of work TOM

Dave K
KTS Race Cars
Dave@KTS is offline  
Old 08-21-2006, 06:01 PM
  #7  
TECH Enthusiast
iTrader: (3)
 
stevemilz's Avatar
 
Join Date: Sep 2004
Location: Michigan
Posts: 672
Likes: 0
Received 0 Likes on 0 Posts

Default

Dave is a good guy and does great work.
stevemilz is offline  
Old 08-21-2006, 06:55 PM
  #8  
TECH Senior Member
iTrader: (2)
 
gator's 99TA's Avatar
 
Join Date: Nov 2001
Location: Tampa Bay
Posts: 9,971
Likes: 0
Received 2 Likes on 2 Posts

Default

wow. getting my popcorn!
gator's 99TA is offline  
Old 08-21-2006, 07:08 PM
  #9  
LS1Tech Sponsor
iTrader: (4)
 
MADMAN's Avatar
 
Join Date: Jan 2002
Location: At the track
Posts: 5,295
Likes: 0
Received 4 Likes on 4 Posts

Default

Not to get into this but I never let a car leave until it is certified.
__________________
www.madmanandcoracing.com


225-343-9029
MADMAN is offline  
Old 08-21-2006, 07:22 PM
  #10  
Teching In
 
GoldenNightmare's Avatar
 
Join Date: Aug 2006
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default KTS Racecars

Doesnt even look like the car was finished. Probably why it didnt pass. KTS just did a 25.5 Camaro for me and it passed NHRA with flying colors. Everyone who has seen the car agree it is the nicest Camaro cage they have seen. Absolutely beautiful work.
Dave also updated my Malibu a few months ago.(rear suspension, 9", front conrol arms, rack, etc). Did over and above what I expected. Took the car to the US131 Street shootout and won the Outlaw class. (first race out). Second race was Milan Drag Radial last month and we came in second. Never even had drag radials on the car before that day. The car works great. Work is awesome. I would recommend KTS to anyone.
Attached Thumbnails Failed 25.5 certification-p5130444.jpg   Failed 25.5 certification-p5130446.jpg   Failed 25.5 certification-camaro.jpg  
GoldenNightmare is offline  
Old 08-21-2006, 07:24 PM
  #11  
On The Tree
 
Dave@KTS's Avatar
 
Join Date: Aug 2004
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by MADMAN
Not to get into this but I never let a car leave until it is certified.
Me either. Its hard to run a shop with two guys and go for three
months with no pay! Tom and I had a falling out. He is being achild by the way he is handling it. I'm at Miland at the Fri. Heads up stuff with our
cars there if he would like to talk to me in person like a man.

Dave K
Dave@KTS is offline  
Old 08-21-2006, 08:09 PM
  #12  
Outlaw 10.5 Director
Thread Starter
iTrader: (9)
 
FSTR-THANU's Avatar
 
Join Date: Nov 2001
Location: Commerce Twp.
Posts: 2,136
Likes: 0
Received 0 Likes on 0 Posts

Default

Dave,

Listen up and listen up good! You were paid every red cent you were owed and I have the signed bill to prove it! I did not blame you, I take responsiblity for all of my own stuff. You want to discuss ANYTHING with me in person; you know first hand I am there. This is not an issue of anything being complete, it is an issue of what was done being wrong. I am not asking you for anything and I am glad all your other cages passed but mine did not. I am not a chassis expert and I have expressed my happiness with the cage in numerous posts and that is fine and dandy but when I run into a problem and post it becomes a problem and I am childish. 3mos without pay? How about a deposit and 3 mos with no work? How about money paid in advanced for work that could not be completed because your were too busy moving again. You blew your wad and ran out of cash so that is my problem? I will not respond to anymore posts or PM's from you. I have been on this board since day 1 and have a good reputation with every sponsor/member I have ever purchased anything from (I have purchased alot!). I will not let you bring me to a lower level.

Good luck Dave!

Tom
FSTR-THANU is offline  
Old 08-21-2006, 08:44 PM
  #13  
On The Tree
 
Dave@KTS's Avatar
 
Join Date: Aug 2004
Posts: 107
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by FSTR-THANU
Dave,

Listen up and listen up good! You were paid every red cent you were owed and I have the signed bill to prove it! I did not blame you, I take responsiblity for all of my own stuff. You want to discuss ANYTHING with me in person; you know first hand I am there. This is not an issue of anything being complete, it is an issue of what was done being wrong. I am not asking you for anything and I am glad all your other cages passed but mine did not. I am not a chassis expert and I have expressed my happiness with the cage in numerous posts and that is fine and dandy but when I run into a problem and post it becomes a problem and I am childish. 3mos without pay? How about a deposit and 3 mos with no work? How about money paid in advanced for work that could not be completed because your were too busy moving again. You blew your wad and ran out of cash so that is my problem? I will not respond to anymore posts or PM's from you. I have been on this board since day 1 and have a good reputation with every sponsor/member I have ever purchased anything from (I have purchased alot!). I will not let you bring me to a lower level.

Good luck Dave!

Tom
Not so fast Mr. Tom!

I have never ever posted a thing about you or against you.
Read your post again. It is you always taking your cheap shots
at me because you keep making the wrong descissions.
You do a good enough job at bringing your self to a lower level.
You cannot take a shot like you just did and not expect a reply.
Grow up Tom. And if you really want to show receipts, I'm game.
I dont mean to bash your rep on this board, I respect your position
on this board but am sick and tired of you bashing my company.
Dont do it again!

Dave K
Dave@KTS is offline  
Old 08-21-2006, 09:08 PM
  #14  
Outlaw 10.5 Director
Thread Starter
iTrader: (9)
 
FSTR-THANU's Avatar
 
Join Date: Nov 2001
Location: Commerce Twp.
Posts: 2,136
Likes: 0
Received 0 Likes on 0 Posts

Default

Good luck dave, I wish you well. If you want to discuss anything further then please call me and we can discuss in person.

btw: you can refer to me as fater-thanu in person. You never really know who your friends are.

Tom
FSTR-THANU is offline  
Old 08-21-2006, 09:22 PM
  #15  
Staging Lane
iTrader: (1)
 
mustangcobratim's Avatar
 
Join Date: Sep 2004
Posts: 52
Likes: 0
Received 0 Likes on 0 Posts

Default

Tom, That sucks to hear. I hope mine certify's! give me a call

Tim
mustangcobratim is offline  
Old 08-22-2006, 07:26 AM
  #16  
TECH Senior Member
iTrader: (21)
 
NA$TY-TA's Avatar
 
Join Date: Aug 2002
Location: San Antonio, TX
Posts: 10,333
Likes: 0
Received 1 Like on 1 Post

Default

That sucks Tom.... it will be taken care of im sure.......


Kyle
NA$TY-TA is offline  
Old 08-22-2006, 07:45 AM
  #17  
Super Moderator
iTrader: (9)
 
Reckless's Avatar
 
Join Date: Nov 2001
Location: Canton, GA
Posts: 10,052
Received 32 Likes on 16 Posts

Default

Wow! How is Tom's post considered as bashing of KTS? I see absolutely no mention of KTS? Seems kind of weird to me.
Reckless is offline  
Old 08-22-2006, 08:12 AM
  #18  
12 Second Club
iTrader: (116)
 
BIG_MIKE2005's Avatar
 
Join Date: Jun 2005
Location: Skiatook, OK
Posts: 5,222
Received 1 Like on 1 Post

Default

Kinda what I was thinkin too. Never read a mention of a specific company or person responsible until ******** open his mouth. If you did a good job or were involved with his cage at all, you went about opening your mouth all wrong.

I never read him bashing you, so unless its posted on this board your claim is false & your just shootin off your mouth. You must have a guilty consience or something to post like you did. It looks like you either knew he would eventually put out the name of the cage builder or you knew you fucked up & wanted to try to save some face.

You just made yourself look bad by posting in the fashion you chose.
BIG_MIKE2005 is offline  
Old 08-22-2006, 08:25 AM
  #19  
TECH Enthusiast
iTrader: (3)
 
stevemilz's Avatar
 
Join Date: Sep 2004
Location: Michigan
Posts: 672
Likes: 0
Received 0 Likes on 0 Posts

Default

The post was edited.
stevemilz is offline  
Old 08-22-2006, 08:27 AM
  #20  
TECH Enthusiast
iTrader: (3)
 
stevemilz's Avatar
 
Join Date: Sep 2004
Location: Michigan
Posts: 672
Likes: 0
Received 0 Likes on 0 Posts

Default

Posted Yesterday, 03:45 PM

Edited Yesterday at 08:10 PM
stevemilz is offline  


Quick Reply: Failed 25.5 certification



All times are GMT -5. The time now is 10:30 AM.