S60 Narrowed, Weld Prostars w/ MT 325/50's *PIC'S*
#1
S60 Narrowed, Weld Prostars w/ MT 325/50's *PIC'S*
Strange S60 Rearend Narrowed 3" Per side, 35 Spline Axles, Full Spool, 3.54 rear Gears.
No more running out of gear in the 1/4 now......
Weld 15X10 Prostars w/ 5.5" BS
Mickey Thompson 325/50/15 ET Street Radials.
Dropped about 200 rpm's @ 55 MPH.... spinning 2500 @56MPH.
The car feels like it loads faster and boosts faster also.....
Pic's i took Today in my driveway....LOL
Kyle
No more running out of gear in the 1/4 now......
Weld 15X10 Prostars w/ 5.5" BS
Mickey Thompson 325/50/15 ET Street Radials.
Dropped about 200 rpm's @ 55 MPH.... spinning 2500 @56MPH.
The car feels like it loads faster and boosts faster also.....
Pic's i took Today in my driveway....LOL
Kyle
#3
Originally Posted by Beaflag VonRathburg
Very nice. I have similar plans also. Did you end up mini tubbing or just using the BFH?
The BFH had been in there before when i had TTII's on the car... bumpstops were completly cutout way back then..... now its all Plasma cut out and on the drivers side you can see spring..... the front of the fender was pounded away also....5lb Hammer... My Buddy Ed who has a Local shop helped me out with all of that.
Thanks
Kyle
#6
Originally Posted by NA$TY-TA
The BFH had been in there before when i had TTII's on the car... bumpstops were completly cutout way back then..... now its all Plasma cut out and on the drivers side you can see spring..... the front of the fender was pounded away also....5lb Hammer... My Buddy Ed who has a Local shop helped me out with all of that.
Thanks
Kyle
Thanks
Kyle
Dan
Trending Topics
#20
Originally Posted by Cobra4B
Looks rather slow... I mean it's only an F-body... doesn't even have a ram air hood. Do you ahve overheating problems.. what's w/ the funky radiator up front and cut bumper?