Juiced

iTrader: (2)

What type/brand of wiring are the Chassis guys using to make custom harness?

MADMAN

iTrader: (4)

I use an ARC switch panel and build my own harnesses.

chpmnsws6

iTrader: (70)

Tried using a universal 14 circuit harness from painless but didn't have real good luck with it so now I'm going to attempt an EZ2Wire 22 circuit harness. I figure for the price (149.99), its worth a shot

Juiced

iTrader: (2)

I plan on doing my own harness i just have to know what brand wire most people use. I know i should be looking for oxygen free anuthing else in perticular?

stroked30th

iTrader: (2)

Anyone know where to get some O.E. connectors? Got a little crazy and tossed most of mine i.e. ignition swith, headlights, head light switch.

BTLFEDSS

iTrader: (12)

Try Casper Electronics
BTLFEDSS

promod1955

iTrader: (44)

I build a harness for the cars I build. Sometimes use an ARC switch panel on some customers cars. Most of the time I just make a switch panel with mil-spec switches.

rockcamaro97

The best wire ive ever used i got was primary wire from a site online called "theinstallbay.com". Very easy to work with, thick jacket, and it doesnt hold shape AT ALL. So it goes where you want it! They have a lot of cool **** on there.

Matt

mrdragster1970

The big spools from farm & fleet.
Been in my slow car for almost 20 years, no problems.
I've used the bulk spools from a few places in the past.

Juiced

iTrader: (2)

possible link?