some pics of my 6speed street car build/rebuild
#1
10 Second Club
Thread Starter
iTrader: (128)
Join Date: Jun 2005
Location: Meridian, MS
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
some pics of my 6speed street car build/rebuild
here it is folks. i noticed everyone else posting pics of their projects so i though i would share mine. sorry about the quality of the pics. i just took them and its DARK outside. i don't have a shop, just a small 8x10 shed
the motor is a 370 iron block with Patriot stg. 3 heads & a custom 248/254 110lsa cam. it has ran before just getting freshened up, it should be ready next week.
trans is a fresh t56 rebuilds package 4a. i'm waiting on a McLeod bellhousing. the 9" has 3.89 gears, lightened spool 35splines, i pulled it apart to change the fluid and put a drain plug in it
the motor is a 370 iron block with Patriot stg. 3 heads & a custom 248/254 110lsa cam. it has ran before just getting freshened up, it should be ready next week.
trans is a fresh t56 rebuilds package 4a. i'm waiting on a McLeod bellhousing. the 9" has 3.89 gears, lightened spool 35splines, i pulled it apart to change the fluid and put a drain plug in it
#6
10 Second Club
Thread Starter
iTrader: (128)
Join Date: Jun 2005
Location: Meridian, MS
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jamesSS
looks good man. what times are you expecting or aiming for with that set up?
i did get the rear put back together today & the t/a back on before it started raining
#7
6 speed cars are the best. I ran almost identical ET and 60 as you but i trapped 129. Lost the clutch that night... Now i picked up about 50/50whp on motor, dropped 200 more lbs, and put a new clutch in. I'm running a posi 12 bolt.. which is one of the weak links in my setup. Do you still street yours a lot? I'm too scared/poor to run a spool on the street. My 325' s would be history. I'm hoping to bust 140's on spray, but with a DR
Trending Topics
#8
10 Second Club
Thread Starter
iTrader: (128)
Join Date: Jun 2005
Location: Meridian, MS
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
yea man i still drive it on the street when i can/want to. the spool isn't a big deal at all. it makes a little noise when turning but nothing horrible. i still have p/s too. when i got the rearend i had a th400 so it was more of a racerish car..... yea thats a word!
#11
Looking good. Looks like that 10X13 shed is plenty of room. My 20x30 garage is filled up halfway with junk. My mower, pressure washer and all my parts. I'm trying to get my 3000 plus sg ft barn built at the same time I building my car.
#12
10 Second Club
Thread Starter
iTrader: (128)
Join Date: Jun 2005
Location: Meridian, MS
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mr.MartyStone
what motor mounts are you running? Stockers with poly insets?
Originally Posted by 6techniques
I love to see 6 speeds go in the single digits! Good luck man, keep us posted on this one!
Originally Posted by cwaldt
Looking good. Looks like that 10X13 shed is plenty of room. My 20x30 garage is filled up halfway with junk. My mower, pressure washer and all my parts. I'm trying to get my 3000 plus sg ft barn built at the same time I building my car.
#15
10 Second Club
Thread Starter
iTrader: (128)
Join Date: Jun 2005
Location: Meridian, MS
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 1BDHWK
Looking good!!! I hope to make the next track event at Montgomery in May. If you need anything, or have questions, shoot me a pm. Good luck from a fellow gear banger.
Ben
Ben
Originally Posted by Ericbigmac83
Looks nice, wish i had the money...and time....and space....and energy. Let us know how it turns out