question about 4.6 mod motors
02-06-2007, 10:37 PM
#1
12 Second Club
Thread Starter
iTrader: (14)
Join Date: Oct 2004
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
question about 4.6 mod motors I have a friend that has a 2000 mustang gt and he is thinking about putting stage 2 cams and stage 2 patriot heads on it. With that and exhaust tune,auto with shift kit 3.73 gears. what do those run 1/4 and also how much power do they put to the ground with an auto. Will they beat an 2002 ws6 with headers,exhaust,tune, lid, drag radials, auto trans, that runs a 12.8 @ 109 Mustang fans let me know what kind of power you are making with cams and heads in your 4.6. Thanks, Jared
02-07-2007, 08:25 AM
#3
11 Second Club
Join Date: Aug 2005
Location: Tampa, FL
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
Dope- I would steer him to that site but the traffic on it is less than stellar. Too many mustang sites as it is. But to answer his question I would say 280-310rwhp and around 320-330rwtq. With a nice stall and shift kit I'd say low 12's with a hard launch. The LS1 will make more power than that auto 2v but if its a roll race on the street that normally goes longer than a 1/4...LS1 hands down. At the strip it would be close. Again, don't know what tires are on the 4.6. Hope this helps. -Mark