Slow Z28

iTrader: (19)

just looking for pics of how you've run the tubes. don't know if i'm going this way or not for the cage. i already have the HVAC out so the dash doesn't need to come out again for anything.

who's got pics.??

tektrans

iTrader: (23)

Pull the dash man, IMO it looks much better and you'll have more room.

Ken95Z28

iTrader: (1)

Here are some, sorry for the crappy resolution, done with my phone. Should be decent enough.

Cage Pics

Steve Burger

iTrader: (33)

I will have mine run this way. I'll get pics ASAP.

Slow Z28

iTrader: (19)

thanks steve...

hoping to see how some others have done it in front of the dash(NOT through the dash)

Steve Burger

iTrader: (33)

Misunderstood. Mine will be through the dash. It leaves more room.

kp

iTrader: (34)

PSJ has them like that and so does next.

TApimp

iTrader: (1)

hope you never need to remove the dash for any reason

Slow Z28

iTrader: (19)

any other reason would be wiring in which it's easily accessible underneath

Pro Stock John

iTrader: (34)

Before the dash:

http://psj.ls1tech.com/gallery/main....&g2_itemId=161

But I'd like to redo it and go thru the dash at some point.

tektrans

iTrader: (23)

I think John's in very nicely done. Fabricator did a good job, I usually don't like the before the dash set ups.

JL ws-6

iTrader: (50)

I thought abotu doing the bars outside the dash someday.. but it's gonna make it too much harder for my big *** to get in and out of the car.. so when it comes time to need it (after the first 9.99 pass) I'll pull the dash, gut that whole thing and have my 6 pt finished off