min. sus. mods for a sub 1.5 60'
#1
TECH Regular
Thread Starter
iTrader: (19)
Join Date: Nov 2002
Location: HAMPTON VA.
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
min. sus. mods for a sub 1.5 60'
what is the min. suspension mods one can get
by with to get below a 1.5 with around 330-50 RWHP and around
say 3300lbs w/driver
I am thinking a wolfe sway bar,and a set of adj up front
I am guessing also that it might not be enough HP or enough weight reduction
to be possible
by with to get below a 1.5 with around 330-50 RWHP and around
say 3300lbs w/driver
I am thinking a wolfe sway bar,and a set of adj up front
I am guessing also that it might not be enough HP or enough weight reduction
to be possible
#2
TECH Fanatic
iTrader: (9)
I have gone 1.47 NA
stock/oem - rear springs, rear shocks, panhard, sway bar, Ta, SS Wheels
aftermarket- lakewood lca, moser 12bolt 3.73 spool, qa1 springs front, qa1 R shocks front
!-front sway bar
tires- MT ET Street 26x11.5 17"
I was probley a little lighter than yours though also you need more hp that that
stock/oem - rear springs, rear shocks, panhard, sway bar, Ta, SS Wheels
aftermarket- lakewood lca, moser 12bolt 3.73 spool, qa1 springs front, qa1 R shocks front
!-front sway bar
tires- MT ET Street 26x11.5 17"
I was probley a little lighter than yours though also you need more hp that that
Last edited by brandonppr; 02-28-2007 at 07:55 AM.
#6
TECH Fanatic
iTrader: (9)
Originally Posted by spanktu
what were your 1/4 times?
1/8th best is 7.29@95
Trending Topics
#8
TECH Regular
Thread Starter
iTrader: (19)
Join Date: Nov 2002
Location: HAMPTON VA.
Posts: 413
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 9sec93
i went 1.50's with lakewood lca's, qa1's, no front sway bar and 320 rwhp with a raceweight of 3300 lbs.