narrowed 9" question...
10-02-2007, 02:18 PM
#1
9 Second Club
Thread Starter
iTrader: (1)
Join Date: Oct 2005
Location: Lexington,S.C.
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
narrowed 9" question... Going to narrow the 9" in my car. My question is How much can I go without modifing the stock suspension location. I would like to go 2.5"-3" and run a 15x10 with 5" to 4.5"BS(running 15x10 with 7.5" now). Thanks for any input.
10-02-2007, 02:25 PM
#2
Launching!
iTrader: (1)
Join Date: Aug 2007
Location: in the Pits
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
mine is narrowed 3.75" per side and it's about as close as you can get, the housing end is no more than 1/10" from the lower arm bracket.
I was told that with Big ford ends you can get it closer but will start to run into fitment issues if you are not careful.
My car is minutubed and i'm using a 10" wheel with a 5.5" BS
I was told that with Big ford ends you can get it closer but will start to run into fitment issues if you are not careful.
My car is minutubed and i'm using a 10" wheel with a 5.5" BS
10-03-2007, 09:39 PM
#7
TECH Enthusiast
iTrader: (25)
Join Date: Nov 2001
Location: shreveport, Louisiana
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
They are alumistar 2.0 wheels you have to have the custom made but let me tell you they sit very nicely in the fender well and it gives you the extra tread patch so the tire isnt so unstable on the top in like it is with a 15x10 I have run both.
Trending Topics
10-10-2007, 05:31 PM
#13
TECH Fanatic
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
If you narrow the rear end, at what point do you have to relocate things like panhard bar mounts and lower control arms?
How big of tires are you guys running with or without these chassis mods and what width rear and tire/ rim size and offset do you use?
How big of tires are you guys running with or without these chassis mods and what width rear and tire/ rim size and offset do you use?
