9" with bars, Custom fuel cell is done!
11-09-2007, 03:48 PM
#1
11 Second Club
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Posts: 773
Likes: 0
Received 0 Likes
on
0 Posts
9" with bars, Custom fuel cell is done! Just wanted to share with you guys a friend of mines car that we just finished up.
It has a Moser 9" and a Jerry Bickel wheelie bar kit on it. We found out the hard way that we couldn't run the T-Top well or stock gas tank...We run a custom cell in the front for the 1 (or 2 or 3) stages so we didn't want to run a different pump in the rear + we already had the Racetronix kit in the stock tank...
This is the result - a 19.9 gallon fuel cell that retains the stock bucket and pump assembly with the stock filler location and everything. We are going to build a rear bulkhead to isolate the cell from the cabin (NHRA rules), so I will post pictures of that when it is done.
Anyways, here are some pictures of it ready to go...we want to powder coat it, but the owner likes it how it is....we will see.
Excuse some of the wires and junk, this was during the build.
It has a Moser 9" and a Jerry Bickel wheelie bar kit on it. We found out the hard way that we couldn't run the T-Top well or stock gas tank...We run a custom cell in the front for the 1 (or 2 or 3) stages so we didn't want to run a different pump in the rear + we already had the Racetronix kit in the stock tank...
This is the result - a 19.9 gallon fuel cell that retains the stock bucket and pump assembly with the stock filler location and everything. We are going to build a rear bulkhead to isolate the cell from the cabin (NHRA rules), so I will post pictures of that when it is done.
Anyways, here are some pictures of it ready to go...we want to powder coat it, but the owner likes it how it is....we will see.
Excuse some of the wires and junk, this was during the build.
11-09-2007, 11:45 PM
#6
TECH Fanatic
Join Date: Oct 2007
Location: Ventura County, California
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
Just wanted to share with you guys a friend of mines car that we just finished up.
It has a Moser 9" and a Jerry Bickel wheelie bar kit on it. We found out the hard way that we couldn't run the T-Top well or stock gas tank...We run a custom cell in the front for the 1 (or 2 or 3) stages so we didn't want to run a different pump in the rear + we already had the Racetronix kit in the stock tank...
This is the result - a 19.9 gallon fuel cell that retains the stock bucket and pump assembly with the stock filler location and everything. We are going to build a rear bulkhead to isolate the cell from the cabin (NHRA rules), so I will post pictures of that when it is done.
Anyways, here are some pictures of it ready to go...we want to powder coat it, but the owner likes it how it is....we will see.
Excuse some of the wires and junk, this was during the build.
It has a Moser 9" and a Jerry Bickel wheelie bar kit on it. We found out the hard way that we couldn't run the T-Top well or stock gas tank...We run a custom cell in the front for the 1 (or 2 or 3) stages so we didn't want to run a different pump in the rear + we already had the Racetronix kit in the stock tank...
This is the result - a 19.9 gallon fuel cell that retains the stock bucket and pump assembly with the stock filler location and everything. We are going to build a rear bulkhead to isolate the cell from the cabin (NHRA rules), so I will post pictures of that when it is done.
Anyways, here are some pictures of it ready to go...we want to powder coat it, but the owner likes it how it is....we will see.
Excuse some of the wires and junk, this was during the build.
