Pro Stock John

iTrader: (34)

Holla! I need one for the winter.

Joey@Tick

iTrader: (20)

Shoot a PM over to Rick@Synergy.

onfire

iTrader: (17)

LPE makes a plug and play 2step.

Dave J

iTrader: (2)

I just use the one on my digital 7 box

Pro Stock John

iTrader: (34)

This one Tom?

http://www.lingenfelter.com/store/rpm-001.html

Dragaholic

iTrader: (180)

Power, ground, and the rest plug-n-play. Lingenfelter. I got mine about 2-3 weeks ago. Very user friendly. Keep in mind though, it's technically a 1 step, because it only limits the launch rpm. The stock PCM will control the top rev limiter.

Dragaholic

iTrader: (180)

Nope, unfortunately, it's the more expensive one.

http://www.lingenfelter.com/store/lnc-001.html

Fireball

iTrader: (21)

thats a rpm switch....you want this:

http://www.lingenfelter.com/store/lnc-001.html

Pro Stock John

iTrader: (34)

Pricey but that's darn close to plug'n play.

I'm looking to step up the Camaro on motor, so I want to control the launches. I already run a two step in the turbo Formula via the BS3.

onfire

iTrader: (17)

http://www.lingenfelter.com/store/lnc-001.html

Dis guy.

You just unplug the coil packs and plug the LPE unit into them. Then the typical control wires. BUM<BUM<BUM<BUM and off you go.

Top Fuel

iTrader: (8)

Lingenfelter here as well. Easy install, clean look, works great

Steve

JL ws-6

iTrader: (50)

I am gonna pick up a lingerfelter one for next year, not sure how it will work with the transbrake and all that but I assume that it will just run in parallell with the switch

JaSSon

iTrader: (11)

Anyone using this with MSD coils.

SilverGhost

iTrader: (53)

I'm going to have to replace mine before next year. My Harlan one had decided to stop working properly and is interupting my fuel/spark for a split second in high rpm going down the track. weird as hell.

JRracing

iTrader: (35)

I wonder if this will work with my carbed ls1 with msd 7ls ignition box. I don't see why it wouldn't. I'll have to call them when I'm ready for it.