Any results? LS6 cam plus heads?
09-06-2009, 09:59 AM
#1
Staging Lane
Thread Starter
Join Date: Aug 2006
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Any results? LS6 cam plus heads? I know I've seen some people post results with a standard LS6 cam and different heads but I can't find any with the stupid search 
Who wants to share their LS6 cam results?
Or link me to some?
Come on workshops
Who wants to share their LS6 cam results?
Or link me to some?
Come on workshops
09-07-2009, 10:36 AM
#2
I dont have any results like that, but if you want to try & post dyno results I'd be happy to work you out a good deal on a set of PRC cnc ported Stage 1 LS6 heads! 
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
09-08-2009, 01:25 PM
#3
FormerVendor
iTrader: (16)
Join Date: Mar 2006
Location: Northern DE
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Heres a graph from my car with a 03 ls6 cam and a set of 6.0 truck heads. Nitrous pull and NA pull on same graph. Not to great with just 9.0-1 compression.
357rwhp 357 rwtq NA
487rwhp 526rwtq 150 shot
357rwhp 357 rwtq NA
487rwhp 526rwtq 150 shot
09-08-2009, 11:31 PM
#4
My car made 385/360. BBK intake and some 5.3 stage 2 heads ported by xfactorpitbull on this site and a z06 cam UNTUNED. The air fuel was 10.5:1 at its lowest point. I think with a good tune it would have hit 400+ hp and close to 380-390 torque. Compression was 11.4:1.
I went to a f14 cam and picked up 60 hp/40tq with the cam and a tune.
I went to a f14 cam and picked up 60 hp/40tq with the cam and a tune.
