Go Back   LS1TECH > LS1-LS2-LS3-LS6-LS7 PERFORMANCE > Dynamometer Results & Comparisons
Sign in using an external account
Register Forgot Password?
Search

Dynamometer Results & Comparisons
Dyno Records | Dyno Discussion | Dyno Wars

Edelbrock Stepped headers?

Reply
 
Thread Tools Search this Thread
Old 02-02-2012, 08:42 PM   #1
Launching!
Garage is empty, add now
 
whiteNrude01's Avatar
 
Trader Rating: 8
Join Date: Mar 2011
Location: Fort Hood, Texas
Posts: 239
Default Edelbrock Stepped headers?

I hopped on edelbrocks blowout sale for those 1 3/4 stepped to 1 7/8 headers for $194!!! Just curious if anyone knows what kinda numbers these dudes put out. Ive heard good things about them. I also went with a TSP 3" ypipe and I have slp LM1..ls6 intake+P&P TB, lid.
__________________
whiteNrude01 is offline   Reply With Quote
Old 02-02-2012, 08:58 PM   #2
Moderator
Garage is empty, add now
 
LIL SS's Avatar
 
Trader Rating: 9
Join Date: Nov 2001
Location: San Jose area
Posts: 2,902
Default

They helped to make 521rwhp with my 418ci motor through a 4L80E, 12 bolt with 4.56's and 315/60/15 drag radials.
__________________
------Motor---------------Bottle
60'---1.53---------------??? Best on another pass was 1.43 spinning
1/8---6.58 @ 105.92----6.25 @ 114.4
1/4---10.38 @ 126.97----9.82 @ 132
LIL SS is offline   Reply With Quote
Old 02-02-2012, 09:07 PM   #3
Launching!
Garage is empty, add now
 
whiteNrude01's Avatar
 
Trader Rating: 8
Join Date: Mar 2011
Location: Fort Hood, Texas
Posts: 239
Default

Quote:
Originally Posted by LIL SS View Post
They helped to make 521rwhp with my 418ci motor through a 4L80E, 12 bolt with 4.56's and 315/60/15 drag radials.
Do you remember what kind of gain you got JUST from those headers?
__________________
whiteNrude01 is offline   Reply With Quote
Old 02-02-2012, 11:09 PM   #4
TECH Regular
Garage is empty, add now
 
a-low's Avatar
 
Trader Rating: 25
Join Date: Nov 2005
Location: Whittier, Kalifornia
Posts: 496
Default

Wait a minute, what sale?
a-low is online now   Reply With Quote
Old 02-03-2012, 05:49 AM   #5
Launching!
Garage is empty, add now
 
whiteNrude01's Avatar
 
Trader Rating: 8
Join Date: Mar 2011
Location: Fort Hood, Texas
Posts: 239
Default

edelbrock store had a huge sell in there lsx headera..there liquidating..they had a 65% off and a 70% off..i jumped on the 70% sell...there all gone and everyones tryin to sell for 600+
whiteNrude01 is offline   Reply With Quote
Old 02-04-2012, 11:35 PM   #6
TECH Enthusiast
Garage is empty, add now
 
ssdungeon's Avatar
 
Trader Rating: 23
Join Date: Oct 2002
Location: Charlotte NC
Posts: 540
Default

I saw them for 309 went to purchase the next day and they were sold out!!!
__________________
Z28 - LS2 |FTRA|ASP UD Pulley|True Duals|4.11 Moser|BMR Drag Bar|Adj LCAs|2" Kooks|Panhard Bar|Adj. TA|Racetronix hotwire & FP|Ported FAST 102|Fast 46lbers |Tick MC|PRO 5.0|Viperized T56|Monster Stage 4|RAII| K&N|Magnaflows|3.5" Drive shaft| 15" Hoosiers on prostar drag pack| HSW fuel cell|Nitrous Outlet Noids
C5 - Roller for sale. $7900.00 set up to ride just needs a long block. 6000.00 in upgrades going with the car.

http://drsshook.shutterfly.com/pictures
ssdungeon is offline   Reply With Quote
Old 02-06-2012, 03:22 PM   #7
TECH Fanatic
2000 Pontiac Trans Am
 
Rare96LT1Formula's Avatar
 
Trader Rating: 4
Join Date: Jan 2011
Location: Glen Ellyn, IL
Posts: 1,331
Default

I grabbed a set. Waiting on install (me) and dynotune from speed inc.
__________________
Huron Speed V2 Non-AC, BMR Turbo KMember, Adjustable Lower A-Arms, Upper A-Arms, T-56 Relocation Crossmember, Viking Double Adjustable Coilovers - 550LB Front Springs, UMI Tubular SFC's & Strut Tower Brace, Founders 3 Piece Poly LCA's, LCA Relocation Brackets, Adjustable Panhard Bar, and Torque Arm.

Coming soon: S60, TR6060, Callies Dragonslayer, Compstar H Beam, Diamond, Injector Dynamics, Squash Performance, etc.
Rare96LT1Formula is offline   Reply With Quote
Old 02-09-2012, 11:55 PM   #8
Moderator
Garage is empty, add now
 
LIL SS's Avatar
 
Trader Rating: 9
Join Date: Nov 2001
Location: San Jose area
Posts: 2,902
Default

Now idea what they made on their own. Went on a 347 with ported heads/cam etc. in a 1962 chevy pick up. Found their way on my new 418. Need to get rid of them.
__________________
------Motor---------------Bottle
60'---1.53---------------??? Best on another pass was 1.43 spinning
1/8---6.58 @ 105.92----6.25 @ 114.4
1/4---10.38 @ 126.97----9.82 @ 132
LIL SS is offline   Reply With Quote
Old 02-12-2012, 06:26 PM   #9
TECH Resident
Garage is empty, add now
 
xRelapse13's Avatar
 
Trader Rating: 21
Join Date: May 2008
Location: East Brunswick, NJ
Posts: 760
Send a message via AIM to xRelapse13 Send a message via Yahoo to xRelapse13
Default

how come you're getting rid of em?
__________________
Me[/COLOR][/FONT][/B][/URL]

Quote:
Originally Posted by my bandit View Post
this might be a dumb question.... why did one tuner send his car to another tuner to get tuned? thats like sending your wife to get knocked up by another guy
xRelapse13 is offline   Reply With Quote
Old 02-13-2012, 09:40 AM   #10
TECH Fanatic
2000 Pontiac Trans Am
 
Rare96LT1Formula's Avatar
 
Trader Rating: 4
Join Date: Jan 2011
Location: Glen Ellyn, IL
Posts: 1,331
Default

Quote:
Originally Posted by xRelapse13 View Post
how come you're getting rid of em?
They were at one point selling for over $1000. When you can get kooks/arh for that price, it's no wonder the edelbrocks weren't exactly flying off the shelf. They're a nice quality header, but not even close to $1000 header imo.
__________________
Huron Speed V2 Non-AC, BMR Turbo KMember, Adjustable Lower A-Arms, Upper A-Arms, T-56 Relocation Crossmember, Viking Double Adjustable Coilovers - 550LB Front Springs, UMI Tubular SFC's & Strut Tower Brace, Founders 3 Piece Poly LCA's, LCA Relocation Brackets, Adjustable Panhard Bar, and Torque Arm.

Coming soon: S60, TR6060, Callies Dragonslayer, Compstar H Beam, Diamond, Injector Dynamics, Squash Performance, etc.
Rare96LT1Formula is offline   Reply With Quote
Old 02-13-2012, 09:43 AM   #11
9 Second Club
Garage is empty, add now
 
tim99ws6's Avatar
 
Trader Rating: 31
Join Date: Oct 2002
Location: Nashville, TN
Posts: 3,182
Send a message via AIM to tim99ws6
Default

Quote:
Originally Posted by Rare96LT1Formula View Post
They were at one point selling for over $1000. When you can get kooks/arh for that price, it's no wonder the edelbrocks weren't exactly flying off the shelf. They're a nice quality header, but not even close to $1000 header imo.
They fit better than alot of Kook's I've installed. I can tell you that much.
__________________
1999 275 Radial Trans Am WS.6
5.8@121
Special Thanks to:
Cage Rage Chassis
MidWest Chassis
RaceWire Solutions
ACE Racing Transmission
AEIcnc
tim99ws6 is offline   Reply With Quote
Old 02-13-2012, 10:45 AM   #12
TECH Fanatic
2000 Pontiac Trans Am
 
Rare96LT1Formula's Avatar
 
Trader Rating: 4
Join Date: Jan 2011
Location: Glen Ellyn, IL
Posts: 1,331
Default

Quote:
Originally Posted by tim99ws6 View Post
They fit better than alot of Kook's I've installed. I can tell you that much.
Thats music to my ears for sure! Haven't gotten around to installing mine yet. What kind of y-pipes are you guys running with these?? The 3.5" collector makes purchasing a ypipe difficult!
__________________
Huron Speed V2 Non-AC, BMR Turbo KMember, Adjustable Lower A-Arms, Upper A-Arms, T-56 Relocation Crossmember, Viking Double Adjustable Coilovers - 550LB Front Springs, UMI Tubular SFC's & Strut Tower Brace, Founders 3 Piece Poly LCA's, LCA Relocation Brackets, Adjustable Panhard Bar, and Torque Arm.

Coming soon: S60, TR6060, Callies Dragonslayer, Compstar H Beam, Diamond, Injector Dynamics, Squash Performance, etc.
Rare96LT1Formula is offline   Reply With Quote
Old 02-13-2012, 10:56 AM   #13
9 Second Club
Garage is empty, add now
 
tim99ws6's Avatar
 
Trader Rating: 31
Join Date: Oct 2002
Location: Nashville, TN
Posts: 3,182
Send a message via AIM to tim99ws6
Default

Quote:
Originally Posted by Rare96LT1Formula View Post
Thats music to my ears for sure! Haven't gotten around to installing mine yet. What kind of y-pipes are you guys running with these?? The 3.5" collector makes purchasing a ypipe difficult!
Edelbrock makes a ypipe for it, and i think TSP makes one as well?


Edelbrock 6571
__________________
1999 275 Radial Trans Am WS.6
5.8@121
Special Thanks to:
Cage Rage Chassis
MidWest Chassis
RaceWire Solutions
ACE Racing Transmission
AEIcnc
tim99ws6 is offline   Reply With Quote
Old 02-13-2012, 02:20 PM   #14
TECH Fanatic
2000 Pontiac Trans Am
 
Rare96LT1Formula's Avatar
 
Trader Rating: 4
Join Date: Jan 2011
Location: Glen Ellyn, IL
Posts: 1,331
Default

Quote:
Originally Posted by tim99ws6 View Post
Edelbrock makes a ypipe for it, and i think TSP makes one as well?


Edelbrock 6571
Yea I've been trying to find one but no luck. Most likely will go with a catted tsp setup. Just wondering if I run reducers on the collectors is a good idea or not..
__________________
Huron Speed V2 Non-AC, BMR Turbo KMember, Adjustable Lower A-Arms, Upper A-Arms, T-56 Relocation Crossmember, Viking Double Adjustable Coilovers - 550LB Front Springs, UMI Tubular SFC's & Strut Tower Brace, Founders 3 Piece Poly LCA's, LCA Relocation Brackets, Adjustable Panhard Bar, and Torque Arm.

Coming soon: S60, TR6060, Callies Dragonslayer, Compstar H Beam, Diamond, Injector Dynamics, Squash Performance, etc.
Rare96LT1Formula is offline   Reply With Quote
Old 02-13-2012, 03:25 PM   #15
Moderator
Garage is empty, add now
 
LIL SS's Avatar
 
Trader Rating: 9
Join Date: Nov 2001
Location: San Jose area
Posts: 2,902
Default

I think I can make more power with a bigger header. 418ci plus the bottle.
__________________
------Motor---------------Bottle
60'---1.53---------------??? Best on another pass was 1.43 spinning
1/8---6.58 @ 105.92----6.25 @ 114.4
1/4---10.38 @ 126.97----9.82 @ 132
LIL SS is offline   Reply With Quote
Old 02-13-2012, 07:57 PM   #16
TECH Resident
Garage is empty, add now
 
xRelapse13's Avatar
 
Trader Rating: 21
Join Date: May 2008
Location: East Brunswick, NJ
Posts: 760
Send a message via AIM to xRelapse13 Send a message via Yahoo to xRelapse13
Default

Lil SS, how much are you looking to get for them/ what kinda condition are they in? Shoot me a pm.
__________________
Me[/COLOR][/FONT][/B][/URL]

Quote:
Originally Posted by my bandit View Post
this might be a dumb question.... why did one tuner send his car to another tuner to get tuned? thats like sending your wife to get knocked up by another guy
xRelapse13 is offline   Reply With Quote
Old 02-14-2012, 09:30 AM   #17
Launching!
Garage is empty, add now
 
whiteNrude01's Avatar
 
Trader Rating: 8
Join Date: Mar 2011
Location: Fort Hood, Texas
Posts: 239
Default

install was great..well as great as working on ls1 can be lol...big hands..i bought flowmaster reducer cones..and a TSP ORY...i ran into some issues with fitment in my garage..no sawsall or weilder...so i took it to exhaust shop..thy had to cut a few inches off my ypipe and welded everything up real nice...tucked up perfectly..sounds good minus my lm1 which sounds like butt...i noticed a big increase in power..feels like shes breathing better...i love these stepped headers
whiteNrude01 is offline   Reply With Quote
Old 02-14-2012, 06:33 PM   #18
Been around the block
Garage is empty, add now
 
moeZ28's Avatar
 
Trader Rating: 7
Join Date: Dec 2003
Location: ashland, ky
Posts: 1,021
Default

I got the Ti-tech coated for $194!! After shipping to my house in Ky, it $235. You cant beat that for a good set of long tubes. I am just waiting to get mine on too. Cant wait! They are goin on a bonestock car with an SLP airlid, mufflex ORY with flowmaster venturi reducers and hooking up to my SLP dual/dual catback. The car is also getting an LS7 clutch kit at the same time since my factory stock LS1 clutch with 109k is toast.
__________________
2001 Camaro SS A4
6.2L iron LS3, 823 L92 heads milled .020", custom blower cam, LS3 intake 92mm TB, SLP lid, Edelbrock LT's, Custom ORY w/ FM Merge, 4" cutout, SLP dual/dual, 4L80e swap, Yank Pro 3600, Strange S60 3.73 gear, Founders LCA's, Spohn TQ arm, Strange CM driveshaft
TUNED BY BLUECAT
M6 #s 476/436 N/A SAE corrected
M6 #'s 554/575 100 shot Nitrous SAE corrected
moeZ28 is offline   Reply With Quote
Old 02-14-2012, 06:38 PM   #19
Been around the block
Garage is empty, add now
 
moeZ28's Avatar
 
Trader Rating: 7
Join Date: Dec 2003
Location: ashland, ky
Posts: 1,021
Default

Just found a site that has Edelbrock ypipe 6571 for our cars, 3.5" inlets/3"outlet...$125+shipping:
http://www.northernautoparts.com/Pro...ntoryId=427900
__________________
2001 Camaro SS A4
6.2L iron LS3, 823 L92 heads milled .020", custom blower cam, LS3 intake 92mm TB, SLP lid, Edelbrock LT's, Custom ORY w/ FM Merge, 4" cutout, SLP dual/dual, 4L80e swap, Yank Pro 3600, Strange S60 3.73 gear, Founders LCA's, Spohn TQ arm, Strange CM driveshaft
TUNED BY BLUECAT
M6 #s 476/436 N/A SAE corrected
M6 #'s 554/575 100 shot Nitrous SAE corrected
moeZ28 is offline   Reply With Quote
Old 02-14-2012, 11:20 PM   #20
TECH Enthusiast
Garage is empty, add now
 
ssdungeon's Avatar
 
Trader Rating: 23
Join Date: Oct 2002
Location: Charlotte NC
Posts: 540
Default From where?

From what site?

Quote:
Originally Posted by moeZ28 View Post
I got the Ti-tech coated for $194!! After shipping to my house in Ky, it $235. You cant beat that for a good set of long tubes. I am just waiting to get mine on too. Cant wait! They are goin on a bonestock car with an SLP airlid, mufflex ORY with flowmaster venturi reducers and hooking up to my SLP dual/dual catback. The car is also getting an LS7 clutch kit at the same time since my factory stock LS1 clutch with 109k is toast.
__________________
Z28 - LS2 |FTRA|ASP UD Pulley|True Duals|4.11 Moser|BMR Drag Bar|Adj LCAs|2" Kooks|Panhard Bar|Adj. TA|Racetronix hotwire & FP|Ported FAST 102|Fast 46lbers |Tick MC|PRO 5.0|Viperized T56|Monster Stage 4|RAII| K&N|Magnaflows|3.5" Drive shaft| 15" Hoosiers on prostar drag pack| HSW fuel cell|Nitrous Outlet Noids
C5 - Roller for sale. $7900.00 set up to ride just needs a long block. 6000.00 in upgrades going with the car.

http://drsshook.shutterfly.com/pictures
ssdungeon is offline   Reply With Quote
Old 02-14-2012, 11:20 PM
LS1Tech
Pontiac Firebird




Paid Advertisement
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Edelbrock 6570 headers 406 Q-ship Parts Classifieds 0 05-13-2013 01:19 PM
Got My Edelbrock Race Headers Today!!!!!!! WOW Sweet71 Generation III External Engine 39 11-26-2011 06:46 PM
Edelbrock Stainless Headers LS-ONE_DAY Generation III External Engine 14 08-13-2011 05:32 PM
Edelbrock Ceramic Coated Stepped Long Tube Headers limited supply!!! Beau@SDPC Sponsor Sales & Specials 5 11-05-2009 05:22 PM
Edelbrock vs Hedman vs Pacesetters Thrasher245 Generation III External Engine 40 01-20-2008 08:30 PM


Tags
chainsaw, dyno, edelbrock, eldebrock, headers, long, ls1, ls1tech, results, snap, step, stepped, trans, tubes, victor


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



Join Ls1Tech

All times are GMT -5. The time now is 05:16 PM.


Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Service - Privacy Statement - JOBS
Emails & Contact Details