Champion motors lsx 454 dyno 647 rwhp na
#1
FormerVendor
Thread Starter
Join Date: Jun 2005
Location: Toronto,Canada
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Champion motors lsx 454 dyno 647 rwhp na
01 Z06 4L60E trans
LSX 454 11.5 to 1 short block
NOS cam but haven't install NOS kit yet.
All Pro LS7 heads
All Pro intake
Accfab TB
:canadaflag:
LSX 454 11.5 to 1 short block
NOS cam but haven't install NOS kit yet.
All Pro LS7 heads
All Pro intake
Accfab TB
:canadaflag:
#3
FormerVendor
Thread Starter
Join Date: Jun 2005
Location: Toronto,Canada
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
http://www.youtube.com/watch?v=G3Ava...1&feature=plcp
We were rolling into the throttle so tranny wouldn't downshift, WOT above 4000rpm. Locked.
We were rolling into the throttle so tranny wouldn't downshift, WOT above 4000rpm. Locked.
Trending Topics
#16
FormerVendor
Thread Starter
Join Date: Jun 2005
Location: Toronto,Canada
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
#20
TECH Fanatic
iTrader: (3)
Join Date: Mar 2007
Location: Middle east , Kuwait
Posts: 1,591
Likes: 0
Received 0 Likes
on
0 Posts
it's same as my setup i have also the all pro heads and 2 piece intake and accufab 4 barrel 4500 throttle and same cam specs but
mine has 13:200cr .
This is my intake from Mast 4500 LS7 two piece
I'll finish it while i get my custom pistons for the high lift cam .
mine has 13:200cr .
This is my intake from Mast 4500 LS7 two piece
I'll finish it while i get my custom pistons for the high lift cam .
Last edited by PONTIAC SLP; 03-17-2012 at 09:23 PM.