PRC 250CC aftermarket castings/g6x3 cam 505rwhp/464rwtq
#1
PRC 250CC aftermarket castings/g6x3 cam 505rwhp/464rwtq
Car is wicked fast. 505RWHP 464 RWTQ
7200 RPM rev limiter. Car didnt start dropping hp until about 65-6600 rpm
Driveability is decent enough. It obviously does not like to be driven with the clutch out at parking lot speeds etc. It will buck slightly in too high of a gear if rpms drop below 1800 or so. Other than that I can live with it just fine. 1st and 2nd gear are useless even with my 305 555r drs. Not much traction in second even from a 40-50 roll.
Detect a slight power loss from bolt on form up to maybe 3k rpm or so. It comes on so quick it doesnt really bother me. Cant notice a drop off in power SOTPants until about 6600rpm. So just like the graph would indicate.
Here is vid
http://www.youtube.com/watch?v=pZN_seeuWTQ
And the graph
7200 RPM rev limiter. Car didnt start dropping hp until about 65-6600 rpm
Driveability is decent enough. It obviously does not like to be driven with the clutch out at parking lot speeds etc. It will buck slightly in too high of a gear if rpms drop below 1800 or so. Other than that I can live with it just fine. 1st and 2nd gear are useless even with my 305 555r drs. Not much traction in second even from a 40-50 roll.
Detect a slight power loss from bolt on form up to maybe 3k rpm or so. It comes on so quick it doesnt really bother me. Cant notice a drop off in power SOTPants until about 6600rpm. So just like the graph would indicate.
Here is vid
http://www.youtube.com/watch?v=pZN_seeuWTQ
And the graph
Last edited by UltraZLS1; 03-31-2012 at 06:16 PM.