Turbo306Fox

iTrader: (3)

Just put together a 408 stroker tell me what you think it will make
2001 Camaro SS
408 stroker 11.5:1 CR
Eagle crank
Eagle rods
Diamond Racing flat top -2cc
ls9 gaskets
GMPP cnc ported ls3 heads 68.5cc
(flow around 350cfm@.700)
Vengeance ported fast 102 intake
Nick Williams 102 throttle body
Johnson lifters
BTR .660 springs titanium retainers
Pat G speced cam 240/252 .629 113+3
Comp Cams 7.40 pushrods
Comp Cams trunion upgrade
Powerbond under drive pulley
6 spd and 10 bolt 3.42 gear

Jake99

iTrader: (2)

600 fw, with the right boltons

Lawhead

iTrader: (14)

600fw? You don't think that combo would make over 500rwhp?

LIL SS

iTrader: (9)

It should make 500rwhp through a m6/10 bolt combo.

george g

iTrader: (12)

You should be around 525 at the tires.

Turbo306Fox

iTrader: (3)

My goal is 550whp on a dyno jet I know numbers don't mean anything but still wanna hit 550 lol

Tuskyz28

Great build but there are power gains to be had from a head swap.

1 Slow WS6

iTrader: (1)

530/495 at the wheels

Rise of the Phoenix

iTrader: (27)

My guess is going to be 525 rwhp.

Turbo306Fox

iTrader: (3)

I wish I would have milled the heads and got the compression up high enough to run e85 and make it worth it

Detoxx03

iTrader: (14)

Auto or manual?

Turbo306Fox

iTrader: (3)

Manual with a 10 bolt for now

Goosecaddy05

i'm with you. 525 and that's with it dialed in perfect. If not i'd say 505-510

Turbo306Fox

iTrader: (3)

Damn sounds like I should have just dropped a stock 6.0 in it and sprayed the ***** off it. I would have saved about $4500 :-(

Goosecaddy05

just spray the 408

Detoxx03

iTrader: (14)

A tad over 500whp is about right. Slap a direct port 200 shot on it when you get bored.

ragtopz28

iTrader: (57)

The 500-525whp is my hopes as well...https://ls1tech.com/forums/generatio...-breather.html
I'm gonna slap it with 300 shot

64post

iTrader: (5)

540rwhp (with a good tune). I have seen more than a few 383's with similar mods in the 510-520 rwhp range. His cam has about 20* overlap and that should be just enough.

Jake99

iTrader: (2)

http://www.superchevy.com/how-to/eng...no-charts.html

lil john

Between 515 to 538 rwhp @ 6600 to 6800 rpm's all depending on how well the the tune is, with Tq in the range of 495 to 520 around 4750 to 4900 rpm's. You'll have a lot of fun with it 4 sure.