Casperws6

my car is a 2000 ws6 a4. mods are: mti lid, borla cat-back (plate opened), slp LT headers, ORY, ASA cam only. car put down 370 rwhp/370 rwtq. Not sure if this is good or not. Still have ls1 intake. any feeback?

Casperws6

oh and by the way, i'd post up the graph but i have no where to host it.

dug

iTrader: (10)

I can host it for you. The numbers arent bad. Especially for an a4.

92SilverSHO

iTrader: (3)

those are awesome numbers man, even good for an m6!, get a pulley and a ported TB damn and an ls6 intake, you will be around 385-390rwhp! thats nuts.

luv2spd

iTrader: (1)

Those are really good numbers. Especially you being an A4 w/out ls6 intake, ported tbody, and pulley.

SouthFL.02.SS

Very good numbers. Awesome torque.

cyclerage

iTrader: (59)

Nice, now get the ASA heads and you'll see about 40hp/40tq like mine.

slow ride

post That dyno sheet! DUG has offerd to host it. We would like to see the TQ curve.

Casperws6

i PMed him about hosting it. as soon as he PMs me back with his email, he'll post it.

slow ride

I see that you are in Ca. Are you planing to pass smog with that cam?

dug

iTrader: (10)

I replied to the pm.

Casperws6

it'll pass smog...

jrp

iTrader: (16)

not legally, especially w/ 11* overlap @ .050

LS1_PNYTAMR

iTrader: (1)

what converter/gear do u have in the car?

Casperws6

i was referring probably to the same way u passed

Casperws6

stock converter

LS1_PNYTAMR

iTrader: (1)

no **** huh??? do u feel any lag down low.. im sure it surges like a sob does it not? the specs are 226/236 .525 lift on both sides with 110 lsa correct? not a lot of lift, but still a lot of cam for a stock verter right?

did u run stock length hardened pushrods or what? what springs ect did u use? the ls6 ones?

dug

iTrader: (10)

http://home.comcast.net/~getoracing/asacam.pdf

Its up.

jrp

iTrader: (16)

gotcha

Casperws6

thank you