H & C w/automatic & Moser 12 bolt #'s inside
#1
10 second playa
Thread Starter
Join Date: Dec 2004
Posts: 1,225
Likes: 0
Received 0 Likes
on
0 Posts
H & C w/automatic & Moser 12 bolt #'s inside
My Cartek Heads and Cam Camaro just dynoed 443 Hp and 398 ftlbs.
That is with a 3X cam and 241 heads. (Who needs 243 castings)
No ported throttle body, no ported intake, no shortbelt, no tricks.
This was an NA pull for a car tuned for N20. (TR6 plugs, 1-7/8 headers etc.)
Here is the best part... the car has an automatic. a stock 4L60-E
and a Moser rear which takes more power to turn.
It even has the stock steel drive shaft.
I switched my Kooks headers Catted Y-pipe out for an off road pipe.
Julio tuned it and walla 443 HP.
If I go LSX and 90mm TB I am sure to break 450 if not 460 RWHP NA. Add in an aluminum driveshaft and a short belt and watch out.
Can you tell I'm happy?
Dave I hate to admit it but you were right again.
Thanks to Julio, Dave, Roy and Rich. The car was in, parts changed, Dynoed and out all in the same day. Pollen didn't even get a chance to fall on it.
That is with a 3X cam and 241 heads. (Who needs 243 castings)
No ported throttle body, no ported intake, no shortbelt, no tricks.
This was an NA pull for a car tuned for N20. (TR6 plugs, 1-7/8 headers etc.)
Here is the best part... the car has an automatic. a stock 4L60-E
and a Moser rear which takes more power to turn.
It even has the stock steel drive shaft.
I switched my Kooks headers Catted Y-pipe out for an off road pipe.
Julio tuned it and walla 443 HP.
If I go LSX and 90mm TB I am sure to break 450 if not 460 RWHP NA. Add in an aluminum driveshaft and a short belt and watch out.
Can you tell I'm happy?
Dave I hate to admit it but you were right again.
Thanks to Julio, Dave, Roy and Rich. The car was in, parts changed, Dynoed and out all in the same day. Pollen didn't even get a chance to fall on it.
#3
10 second playa
Thread Starter
Join Date: Dec 2004
Posts: 1,225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 00RedWs6
nice #s. not often you see an automatic lay down those numbers.
Thanks, my thoughts exactly.
I would like to break the 450 barrier. So close yet so far....
Time for more mods I guess?
#5
10 second playa
Thread Starter
Join Date: Dec 2004
Posts: 1,225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JS
I Went 10.80's@124 threw an A4
S1 LS6 heads ported locally with a TR224 and all the boltons...
I never had it on a dyno but I bet it was a bout 430RW...
I bet with traction u have a 10 Sec car...
Impressive numbers Anon......
S1 LS6 heads ported locally with a TR224 and all the boltons...
I never had it on a dyno but I bet it was a bout 430RW...
I bet with traction u have a 10 Sec car...
Impressive numbers Anon......
Thanks again.
Yeah 10.80's is no joke. 430 sounds right.
I would like to get in the 10's NA, but I don't know.
I have a lot of compromises in my set up for the N2O.
Converter, gearing, header diameter, spark plugs etc...
That is why I am so surprised by the dyno #'s. I didn't expect it to respond as well as it did. But we race cars not dyno's. We shall see.
All things being equal whether the number are a little high or a little low, they have to be in the ball park. The weather outside was average so I figure on a hot day 425hp, in the winter at Atco 460hp. Even compared to other Cartek cars I am making great power so I am using that as a barometer.
As opposed to other dyno's that I have no experience with.
If I can upset some six speed Cartek customers something must be right!
Trending Topics
#8
10 second playa
Thread Starter
Join Date: Dec 2004
Posts: 1,225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Wicked_Hugger99
Great numbers man. Im assuming locked?
Stock verter or aftermarket? also, you might wanna think about beefin up that tranny a lil and get a transcooler
BTW, this is on an LS1 yes, thought they all came w/ an an alum. D.S. stock
Stock verter or aftermarket? also, you might wanna think about beefin up that tranny a lil and get a transcooler
BTW, this is on an LS1 yes, thought they all came w/ an an alum. D.S. stock
I have a deep pan and a trans cooler.
Yes, this is on an LS1 with 241 castings (which are LS1 castings not ZO6)
No, stripper HT cars came with steel drivshafts.
#9
Originally Posted by Anonymous
Thanks, my thoughts exactly.
I would like to break the 450 barrier. So close yet so far....
Time for more mods I guess?
I would like to break the 450 barrier. So close yet so far....
Time for more mods I guess?
I wish my car was half as nice as yours.
You must have a nine in that car on the bottle.
Cartek does it again.
#11
10 second playa
Thread Starter
Join Date: Dec 2004
Posts: 1,225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hardtop00SS
awesome #'s, what were the numbers before swapping to the ORY? I'd like to know the power gains from switching from cats to no cats...
Thanks
I knew someone would ask so here you go...
w/Cats 432.1 Rwhp & 384.6 Rwtq
OR Pipe 442.9 Rwhp & 398.0 Rwtq
Basically 11 hp & 13 tq gain.
Both with converter locked.
Nice gains in my opinion. They were high flow cats as well.
Whatever comes on the Kooks Y pipe for $500.00
I think they are Magnaflow, but I am not sure?
#13
10 second playa
Thread Starter
Join Date: Dec 2004
Posts: 1,225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JakeFusion
What catback, or did you dyno through a cutout? Great numbers, btw!
I also have a few friends who have Corsa and all are happy.
I called Corsa before I bought that cat back and they said it was not restrictive up to 600 HP. So, I am not worried about it at this point.
I figure at the most I am making 525 to 530 at the crank.
#15
Banned
iTrader: (23)
Originally Posted by JS
I Went 10.80's@124 threw an A4
S1 LS6 heads ported locally with a TR224 and all the boltons...
I never had it on a dyno but I bet it was a bout 430RW...
I bet with traction u have a 10 Sec car...
Impressive numbers Anon......
S1 LS6 heads ported locally with a TR224 and all the boltons...
I never had it on a dyno but I bet it was a bout 430RW...
I bet with traction u have a 10 Sec car...
Impressive numbers Anon......
What converter were you using?
#17
10 second playa
Thread Starter
Join Date: Dec 2004
Posts: 1,225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Wicked_Hugger99
got any sound clips or idle/flyby vids of it?
When other guys hear my car they just look at me and grin.
They know there is trouble lurking under the hood.
#19
10 second playa
Thread Starter
Join Date: Dec 2004
Posts: 1,225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JZ'sTA
BTW AWSOME NUMBERS.
Through a A4 with a stall that is damn impressive.
Big congs.
I can see low 11's on slicks maybe even a 10 with that stall.
Through a A4 with a stall that is damn impressive.
Big congs.
I can see low 11's on slicks maybe even a 10 with that stall.