installed tr224....crappy dyno results - LS1TECH



Dynamometer Results & Comparisons Dyno Records | Dyno Discussion | Dyno Wars

installed tr224....crappy dyno results

Reply
 
Thread Tools Search this Thread
Old 05-06-2006, 11:08 PM   #1
TECH Regular
Thread Starter
iTrader: (9)
 
getusumws6's Avatar
 
Join Date: Jan 2006
Location: olathe,ks
Posts: 445
Default installed tr224....crappy dyno results

Hey guys comment on this please. I recently installed a tr224/224 563. 112 in my 2002 ws6, at the same I had my LTs, 3500 stall, 3.73s and tunning done to it. It only made 344rwhp sonds like bullshit to me. I figured to have at least 380 to the ground. before I had this work done all i I had was a LM catback, k&n, lid, and a hypertech tuner and it made 315rwhp in my a4. Now thats only 28tish hp with a cam and LTs!!!!!!! Does this not sound right to anyone? Anyone else have this problem?
getusumws6 is offline   Reply With Quote
Old 05-07-2006, 02:58 AM   #2
11 Second Club
iTrader: (36)
 
Magnet's Avatar
 
Join Date: Sep 2004
Location: Fort Myers Florida
Posts: 3,824
Default

check the general stuff aka plugs etc and if everything looks right take it to the track and see what she does...dynos numbers dont mean anything....
Magnet is offline   Reply With Quote
Old 05-07-2006, 03:13 AM   #3
TECH Senior Member
iTrader: (4)
 
ULTIMATEORANGESS's Avatar
 
Join Date: Mar 2003
Location: eatontown,nj
Posts: 10,977
Default

are your lifters ok?
ULTIMATEORANGESS is offline   Reply With Quote
Old 05-07-2006, 04:10 AM   #4
TECH Enthusiast
iTrader: (7)
 
Phlip00WS6's Avatar
 
Join Date: Mar 2006
Location: Austin, TX
Posts: 566
Default

Somethings not right... I have the same cam with just a few bolt-ons and made 405 in a M6.
Phlip00WS6 is offline   Reply With Quote
Old 05-07-2006, 06:20 AM   #5
TECH Fanatic
iTrader: (1)
 
lilbuddy1587's Avatar
 
Join Date: May 2004
Location: Mesa, Arizona
Posts: 1,692
Default

3500 stall on a dyno = not so friendly with numbers. You guys should know something this basic. If the verter isn't locked up, it's going to show low numbers.
lilbuddy1587 is offline   Reply With Quote
Old 05-07-2006, 06:32 AM   #6
TECH Addict
 
bad95killer's Avatar
 
Join Date: Jul 2002
Location: Somewhere I Belong
Posts: 2,906
Default

Quote:
Originally Posted by lilbuddy1587
3500 stall on a dyno = not so friendly with numbers. You guys should know something this basic. If the verter isn't locked up, it's going to show low numbers.
Exactly....i'm sure this numbers was with Un-Locked Converter

peace
bad95killer is offline   Reply With Quote
Old 05-07-2006, 09:04 AM   #7
Moderator
iTrader: (4)
 
davered00ss's Avatar
 
Join Date: Nov 2003
Location: Plainfield, CT
Posts: 10,520
Default

Do you know if the converter was locked or not?
davered00ss is offline   Reply With Quote
Old 05-07-2006, 10:11 AM   #8
TECH Enthusiast
iTrader: (3)
 
JDPZ28's Avatar
 
Join Date: Oct 2003
Location: Holly Springs, NC
Posts: 586
Default

#'s look ok to me for a stalled A4 with a relatively small cam. Like other's have said, take it to the track and see how it does.
JDPZ28 is offline   Reply With Quote
Old 05-07-2006, 10:18 AM   #9
Moderator
iTrader: (4)
 
davered00ss's Avatar
 
Join Date: Nov 2003
Location: Plainfield, CT
Posts: 10,520
Default

You should have gained that from the headers alone.
davered00ss is offline   Reply With Quote
Old 05-07-2006, 12:48 PM   #10
TECH Enthusiast
iTrader: (18)
 
kazfan30's Avatar
 
Join Date: Mar 2005
Location: Hattiesburg, Mississippi
Posts: 654
Default

Quote:
Originally Posted by getusumws6
Hey guys comment on this please. I recently installed a tr224/224 563. 112 in my 2002 ws6, at the same I had my LTs, 3500 stall, 3.73s and tunning done to it. It only made 344rwhp sonds like bullshit to me. I figured to have at least 380 to the ground. before I had this work done all i I had was a LM catback, k&n, lid, and a hypertech tuner and it made 315rwhp in my a4. Now thats only 28tish hp with a cam and LTs!!!!!!! Does this not sound right to anyone? Anyone else have this problem?

That sounds bout right to me, my car is REALLY close to yours. My cam is a 222/228 551/551 on a 115 and with my 3600 stall and 3.73's i made 375/358 locked, and bout 352/339 unlocked. Your setup sounds fine to me. As mentioned the stall and 3.73's are killing your numbers What times are you running, and MPH so i can compare my cars performance to yours
kazfan30 is offline   Reply With Quote
Old 05-07-2006, 07:05 PM   #11
TECH Junkie
 
BlueSix's Avatar
 
Join Date: May 2003
Location: its fucking cold
Posts: 3,050
Default

the power is there, take it to KCIR and you'll see.
BlueSix is offline   Reply With Quote
Old 05-07-2006, 07:44 PM   #12
TECH Fanatic
iTrader: (3)
 
Ryan02SS's Avatar
 
Join Date: May 2003
Location: Lake Anna, VA/ Fairmont, WV
Posts: 1,795
Default

No mention of tuning? Car still on the stock tune?
Ryan02SS is offline   Reply With Quote
Old 05-07-2006, 07:55 PM   #13
11 Second Club
iTrader: (1)
 
Join Date: Jun 2004
Location: Nashville, TN
Posts: 267
Default

I agree with everyone else...it's the TQ converter throwing off the numbers...
red1999z28 is offline   Reply With Quote
Old 05-08-2006, 10:43 PM   #14
TECH Regular
Thread Starter
iTrader: (9)
 
getusumws6's Avatar
 
Join Date: Jan 2006
Location: olathe,ks
Posts: 445
Default

I dont have any times yet, I'm still grinding on the brake calipers. I bought a set of 15x10s and MT 275/50/15 dr's so it would hook. My nitto 555 burn through 3 gears!
getusumws6 is offline   Reply With Quote
Old 05-08-2006, 11:11 PM   #15
TECH Enthusiast
iTrader: (87)
 
zspot98's Avatar
 
Join Date: Sep 2004
Location: Charleston, SC
Posts: 601
Default

Dynojet or Mustang?
zspot98 is offline   Reply With Quote
Old 05-09-2006, 02:37 AM   #16
TECH Fanatic
iTrader: (1)
 
lilbuddy1587's Avatar
 
Join Date: May 2004
Location: Mesa, Arizona
Posts: 1,692
Default

Quote:
Originally Posted by zspot98
Dynojet or Mustang?
Doesn't matter, did you not read the thread ? Unlocked 3500 stall + dyno = poor numbers. At the track will be a different story.
lilbuddy1587 is offline   Reply With Quote
Old 05-09-2006, 10:47 AM   #17
TECH Addict
iTrader: (18)
 
Join Date: Jun 2004
Location: WI
Posts: 2,247
Default

Quote:
Originally Posted by lilbuddy1587
Doesn't matter, did you not read the thread ? Unlocked 3500 stall + dyno = poor numbers. At the track will be a different story.
Actually it does, because the Mustang is going to show lower numbers than a Dynojet.
Zick is offline   Reply With Quote
Old 05-09-2006, 12:44 PM   #18
On The Tree
 
Join Date: Aug 2005
Location: MPLS MN
Posts: 124
Default

I made 400/390 on my old TR224.
HAULNTA is offline   Reply With Quote
Old 05-09-2006, 09:15 PM   #19
TECH Junkie
 
BlueSix's Avatar
 
Join Date: May 2003
Location: its fucking cold
Posts: 3,050
Default

Quote:
Originally Posted by HAULNTA
I made 400/390 on my old TR224.

Not relevant, comparing M6 dyno numbers to unlocked stalled A4 dyno numbers is like comparing apples to monkeys.
BlueSix is offline   Reply With Quote
Old 05-09-2006, 09:29 PM   #20
TECH Fanatic
iTrader: (1)
 
66deuce's Avatar
 
Join Date: Feb 2004
Location: Goshen,In.
Posts: 1,027
Default

STALLED A4s AREN'T DYNO FRIENDLY.there was a mustang at an open dyno day last sat. that dynoed at 261rwhp. but he runs 12.0s with a 1.6+ 60'.this is with a 3800stall TQ and 4.10 gears,and a little 302 motor.
i think your numbers are probably on par with your mods.but if your not sure,have somebody else look at the tune.
66deuce is offline   Reply With Quote
Reply


Tags
dyno, tr224

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -5. The time now is 08:10 PM.