snakeeater03

iTrader: (1)

this is my dyno sheet with stock intake. Im coming home next month and im looking to get up to 450hp. Just one of the goals I have for the car. Ive bought the ls6 intake and getting the under drive pulley. I know that wont put me to the 450 range. So my question is: what do I do next to get there? Should I have just gone to the 90/90 setup or is there anything else other than spray that will get me there. Like I said, I would just like to check off another goal of the car that I've set. Wont be too dissapointed 425-430.

http://i447.photobucket.com/albums/q...8706/dyno2.jpg

krazy4

iTrader: (5)

I would shoot for 430. That is a good number through an auto.

snakeeater03

iTrader: (1)

thats about what I expect to get. main goal is mid to low 11's anyway. I'll be happy with that no matter what the dyno says

FireBird_Fr3ak

iTrader: (7)

id say a 125hp shot of nitrous would be effective...

snakeeater03

iTrader: (1)

i would like to go that rout, just not wanting to pay for the consiquenses just yet. Maybe I'll have to give dave a call when i get back to texas!!!

bobby1

good set up swap cams to something bigger and up the gear to like a 3.42 or higher maybe like a trex or lg x4 or x5either way your right there with your goals

snakeeater03

iTrader: (1)

How close do you guys think I would come with my set up and a FAST 92 and the pulley. Do you think the money would even be worth it.

2QUIK4U

iTrader: (7)

I think you can probably get around 440 with a ported Fast 92 and the pulley.

snakeeater03

iTrader: (1)

that would be a good solid number, just dont know if i want to dish out that much for another 20hp.

180ls1

iTrader: (4)

get a victor jr. and an elbow if you look around you can get bith of those for about $350 new and you have an inexpensive 90mm setup. Then you just need a tb. It will flow dead even with a stock fast 90.