palaSS

Lookin to have my ls machined for a 408 and lookin for shops that are good with Ls motors at a reasonable price, I know of RPM any others??? Thanks

ATwelveSec02Z28

iTrader: (17)

Fran can get you all set, but Weston's in North Jersey is damn good with LS's... I think they did Eddie Krawic's motor

lamdenali

iTrader: (5)

Is TD performance in little Ferry NJ still in Business ?

Firehawk441

iTrader: (41)

http://www.westonmachine.com/

Nobody is better then Charlie Weston

palaSS

Thanks guys before I posted this lastnite I did email Fran at RPM bout what I had planned and wanted but i waitin on a response... All I really want is .030 over bore and clearence for the 4in crank and ballpark figures so I kno what im workin with???

jts98z28

iTrader: (18)

fonse performance in NJ, great people to deal with and they know what theyre doing

4DRUSH

iTrader: (2)

If they're race car isn't down or they're in the mood you might get a build done. Maybe!!!!

tektrans

iTrader: (23)

Weston

1998silverbird

iTrader: (29)

D&F machine shop in Berlin NJ about 10 miles east of the WW bridge. They put together my motor and worked my heads a little. They have assembled a lot of LSX motors in the NJ area. If you see any Twisted minds racing cars chances are there machine work was done at D&F.

palaSS

If you don't mind me askin, for a 408, what do you think they would charge??? What's there contact info thanks

A_VAS

iTrader: (16)

The CSP (complete street perf) shop is in West Chester...you could drop your parts off there, I can turn them into a 408 for you.

firehawk 385

Are you at all familiar with any other machine shops or just this one?

1998silverbird

iTrader: (29)

I know of others but haven't used them. I go by what Tommy of Twisted Minds Racing tells me to use. This Machine shop has done the work on some pretty sick cars here in NJ.



Address: 417 North Grove Street, Berlin, NJ 08009
Phone: (856) 767-4095
Hours: Thursday hours 8:00 am–5:00 pm - See all

firehawk 385

That's what I figured.

khaotic

iTrader: (2)

Not sure what part Pa but i use Andy Jensen with good luck,
http://www.jensensenginetech.com/

Or Fran at Rpm not sure it they do or sub out their machine work or if they recommend any one that they use

F110Mech

iTrader: (2)

I go through D&F as well. They do a lot of LSXs and are currently doing my short block for my turbo car.

palaSS

I knew a guy at advance auto that had a black gto that got his motor work done out west Chester but I dont kno the name of the shop... And how much we talkin for a 408 built from you???

george g

iTrader: (12)

A_VAS built my 408 and it runs great with no problems.

KnightmareCS

iTrader: (15)

It was probably CSP.

palaSS

Pm sent to A_VAS...