TTP Accepting Job Applications - F/T P/T Mechanic Positions
#1
Banned
Thread Starter
iTrader: (18)
Join Date: Aug 2003
Location: Wayne, NJ
Posts: 2,984
Likes: 0
Received 0 Likes
on
0 Posts
TTP Accepting Job Applications - F/T P/T Mechanic Positions
We are once again growing here @ TTP. We are moving into a 4800 square foot shop at the beginning of August. Don't worry guys, it is about 4 blocks away from the current shop!
But now I need some more staff to support our growing shop. I am looking to hire full-time and part-time mechanics. Please fax or email over resumes. Experience in the Gen III & Gen IV LSx series motors, Modular/Windsor Fords, and Import Performance (Supras, WRXs, Hondas, etc.) are a big plus. Will train.
Fax # 973-365-2271
email - matt@ttperformance.net
Any inquiries you can PM or give us a call.
- Matt
But now I need some more staff to support our growing shop. I am looking to hire full-time and part-time mechanics. Please fax or email over resumes. Experience in the Gen III & Gen IV LSx series motors, Modular/Windsor Fords, and Import Performance (Supras, WRXs, Hondas, etc.) are a big plus. Will train.
Fax # 973-365-2271
email - matt@ttperformance.net
Any inquiries you can PM or give us a call.
- Matt
#2
TECH Resident
iTrader: (2)
Join Date: Dec 2001
Location: CT
Posts: 873
Likes: 0
Received 0 Likes
on
0 Posts
The neighbors finally got you evicted huh? lol. Damn good thing you got the above ground dyno.
Does it have a better parking lot so you can leave more than 2mm between cars now and preferred Escalade parking?
Does it have a better parking lot so you can leave more than 2mm between cars now and preferred Escalade parking?
#3
Banned
Thread Starter
iTrader: (18)
Join Date: Aug 2003
Location: Wayne, NJ
Posts: 2,984
Likes: 0
Received 0 Likes
on
0 Posts
The dynojet is actually going to go in-ground in the new shop. And soon to be joined by his twin, so we will be doing AWD vehicles soon.
F**k the neighbors they cant hold me down, lol. Nah we really need the room obviously.
The new shop will afford for a lot of inside parking, but of course any cars left outside will be in a locked/gated/fenced in yard. And yes, we should be able to allow for at least 2.5mm , haha. Nah it's a lot bigger, plus we have use of my landlord's parking lot across the street which is the Clifton police impound lot.
Yes, preferred Escalade, Z28, & Probe parking for my managers right in front of the office/showroom. And on top of the showroom I have another office with a lock for managers so Nick, Jon, and I dont pull our hair out There is also another office in the back with a shower, so those lap dances that Nick gives out with every cam install doesnt get my floor all messy anymore...
The new shop will have the AWD dynojet, a tire balancer/mounting machine, and 7 lifts.
F**k the neighbors they cant hold me down, lol. Nah we really need the room obviously.
The new shop will afford for a lot of inside parking, but of course any cars left outside will be in a locked/gated/fenced in yard. And yes, we should be able to allow for at least 2.5mm , haha. Nah it's a lot bigger, plus we have use of my landlord's parking lot across the street which is the Clifton police impound lot.
Yes, preferred Escalade, Z28, & Probe parking for my managers right in front of the office/showroom. And on top of the showroom I have another office with a lock for managers so Nick, Jon, and I dont pull our hair out There is also another office in the back with a shower, so those lap dances that Nick gives out with every cam install doesnt get my floor all messy anymore...
The new shop will have the AWD dynojet, a tire balancer/mounting machine, and 7 lifts.
#4
TECH Enthusiast
Join Date: Aug 2004
Location: Manhattan, NY
Posts: 580
Likes: 0
Received 0 Likes
on
0 Posts
damn! sounds like a great setup
Originally Posted by TTPMatt
The dynojet is actually going to go in-ground in the new shop. And soon to be joined by his twin, so we will be doing AWD vehicles soon.
F**k the neighbors they cant hold me down, lol. Nah we really need the room obviously.
The new shop will afford for a lot of inside parking, but of course any cars left outside will be in a locked/gated/fenced in yard. And yes, we should be able to allow for at least 2.5mm , haha. Nah it's a lot bigger, plus we have use of my landlord's parking lot across the street which is the Clifton police impound lot.
Yes, preferred Escalade, Z28, & Probe parking for my managers right in front of the office/showroom. And on top of the showroom I have another office with a lock for managers so Nick, Jon, and I dont pull our hair out There is also another office in the back with a shower, so those lap dances that Nick gives out with every cam install doesnt get my floor all messy anymore...
The new shop will have the AWD dynojet, a tire balancer/mounting machine, and 7 lifts.
F**k the neighbors they cant hold me down, lol. Nah we really need the room obviously.
The new shop will afford for a lot of inside parking, but of course any cars left outside will be in a locked/gated/fenced in yard. And yes, we should be able to allow for at least 2.5mm , haha. Nah it's a lot bigger, plus we have use of my landlord's parking lot across the street which is the Clifton police impound lot.
Yes, preferred Escalade, Z28, & Probe parking for my managers right in front of the office/showroom. And on top of the showroom I have another office with a lock for managers so Nick, Jon, and I dont pull our hair out There is also another office in the back with a shower, so those lap dances that Nick gives out with every cam install doesnt get my floor all messy anymore...
The new shop will have the AWD dynojet, a tire balancer/mounting machine, and 7 lifts.
Trending Topics
#9
TECH Fanatic
iTrader: (1)
Originally Posted by TTPMatt
The dynojet is actually going to go in-ground in the new shop. And soon to be joined by his twin, so we will be doing AWD vehicles soon.
.
.
#14
TECH Resident
iTrader: (2)
Join Date: Dec 2001
Location: CT
Posts: 873
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nikon1999
AWD dyno huh? i need to find one! what wheelebase will it accept? big enough for a silverado ss i hope