Prototype Photos of TTP Harness Bar + Crotch Strap for 5-Pt Harness
02-13-2008, 06:57 PM
#1
Banned
Thread Starter
iTrader: (18)
Join Date: Aug 2003
Location: Wayne, NJ
Posts: 2,984
Likes: 0
Received 0 Likes
on
0 Posts
Prototype Photos of TTP Harness Bar + Crotch Strap for 5-Pt Harness This is the upper bar that is already made, however we need to add legs and the crotch strap bracket. We should be able to have production going on these units by Friday. I would like to show everyone the full production unit before taking orders, but everything will be bolted in, no cutting !!
Okay, we have the first prototype unit. It's beautiful, it is level and includes the driver's seat belt gussets. We have found out that the bar is not stable enough at the proper level and needs to have legs. There is an upside and a downside to this. Upside, there is more solid support, and you can bolt your stock seats back in for appearance (There will be no upper seat belt though we have to use that mounting point). Downside, most of the rear seat deletes that I have seen do not work of course most people do them custom so if you are looking to do that also I would not buy a kit but instead custom.
Okay, we have the first prototype unit. It's beautiful, it is level and includes the driver's seat belt gussets. We have found out that the bar is not stable enough at the proper level and needs to have legs. There is an upside and a downside to this. Upside, there is more solid support, and you can bolt your stock seats back in for appearance (There will be no upper seat belt though we have to use that mounting point). Downside, most of the rear seat deletes that I have seen do not work of course most people do them custom so if you are looking to do that also I would not buy a kit but instead custom.
02-13-2008, 10:06 PM
#5
Banned
Thread Starter
iTrader: (18)
Join Date: Aug 2003
Location: Wayne, NJ
Posts: 2,984
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Alex... We have pricing available now:
We will have full prototype finished pictures tomorrow including with full interior inside. Due to the demand that I have had to have a pre-sale I will be posting that sale information tonight.
Pretty much they will all cost the same. Here is going to be the breakdown of pricing, this includes the following:
TTP Harness Bar Base Kit $259.99 (Powdercoated)
All Round Tubing 1 3/4" Mild Steel (.120" Thickness)
- 1x TTP Harness Main Bar Hoop (Includes mounting plates for rear seat belt mount)
- 2x TTP Harness Bar Legs (Includes mounting hardware/gussets for bolt-in installation)
- 1/8" Thick Steel Plate for Main Bar Hoop Mounting.
- Includes mounting points for Both Driver & Passenger.
- Includes Crotch Strap Bracket for 5th Point Harness Mount Both Driver & Passenger.
- All associated hardware is included.
- Upgrade to lightweight 4130 Chromemoly Round Tubing $75
- Add Powder Coat In Special Color (Candy Apple, Electric Blue, Bright Yellow, Emerald Green) $10
- Add Fire Extinguisher Mount - $40
- Add Passenger Seat Belt Mounting Point + Crotch Bracket $45
Seatbelt Harness Setup
- Stock Camaro Seats
- Stock Firebird Seats
- Aftermarket Seats w/ Cutouts
*** For the Group Purchase I will UPGRADE the Base Bar Kit to 4130 Chromemoly Tubing TIG Welded Kit ($75 Value) ***
We will have full prototype finished pictures tomorrow including with full interior inside. Due to the demand that I have had to have a pre-sale I will be posting that sale information tonight.
Pretty much they will all cost the same. Here is going to be the breakdown of pricing, this includes the following:
TTP Harness Bar Base Kit $259.99 (Powdercoated)
All Round Tubing 1 3/4" Mild Steel (.120" Thickness)
- 1x TTP Harness Main Bar Hoop (Includes mounting plates for rear seat belt mount)
- 2x TTP Harness Bar Legs (Includes mounting hardware/gussets for bolt-in installation)
- 1/8" Thick Steel Plate for Main Bar Hoop Mounting.
- Includes mounting points for Both Driver & Passenger.
- Includes Crotch Strap Bracket for 5th Point Harness Mount Both Driver & Passenger.
- All associated hardware is included.
- Upgrade to lightweight 4130 Chromemoly Round Tubing $75
- Add Powder Coat In Special Color (Candy Apple, Electric Blue, Bright Yellow, Emerald Green) $10
- Add Fire Extinguisher Mount - $40
- Add Passenger Seat Belt Mounting Point + Crotch Bracket $45
Seatbelt Harness Setup
- Stock Camaro Seats
- Stock Firebird Seats
- Aftermarket Seats w/ Cutouts
*** For the Group Purchase I will UPGRADE the Base Bar Kit to 4130 Chromemoly Tubing TIG Welded Kit ($75 Value) ***
Trending Topics
10-28-2008, 02:04 PM
#8
Banned
Thread Starter
iTrader: (18)
Join Date: Aug 2003
Location: Wayne, NJ
Posts: 2,984
Likes: 0
Received 0 Likes
on
0 Posts
Sorry guys we have held these for production right now. I'll let you know on when we come back into production.
ynkssws6: $85 per wheel includes prep, might be additional for rust, etc. + Dismount, Remount
ynkssws6: $85 per wheel includes prep, might be additional for rust, etc. + Dismount, Remount
10-28-2008, 02:20 PM
#9
TECH Resident
iTrader: (1)
Join Date: Mar 2004
Location: NJ
Posts: 986
Likes: 0
Received 0 Likes
on
0 Posts
So you'll polish them? Sounds a little steep. Also, I know there were several questions about the Equalizer 4 dyno results you posted might want to check out that thread
