TKAYRC3

iTrader: (8)

Second time out with the car, Track was hookin real good!!
02 Z28 3400# race weight
408 Th400 12 bolt w 4.10's
10.09 @ 134 1.419 60 ft.
Here is the Vid:

url=http://fastlsx.vidiac.com/video/741760ef-c633-44a3-8cc1-9a6a016bc787.htm][/url]Click here to see Video

Fred99Z28

Very nice run! What size stall are you running? What kind of RW/TQ is the 408 putting down? Suspension? I'm curious on the suspension setup especially.

Fred

TKAYRC3

iTrader: (8)

I have a Select 5000 conv.
I have QA1's adj shocks all around, PA K-member, Spohn upper & lower control arms, spohn chassis mount T/A. Spohn drag bar stock rear springs,
Adj rear LCA's & Panhard bar,
Simple set-up & I can drive the car anywhere!!


John

Fred99Z28

Thanks for the info. You have a very nice setup and eventually think I might go to a similar setup. I'm thinking of a 4400 stall eventually, just trying to figure what the best tranny setup will be. Currently the car is a six speed and probably stay that way for the next couple years. Long term plan on making this a low 9 sec street car. Thanks for the info, Fred

98camaroLS1M6

iTrader: (35)

Nice vid, car leaves great!!!

CamaroRacing12

iTrader: (5)

drop that 60ft about half a tenth and thats a 9 sec pass.... maybe put some weight on the front end? keep her on the ground?

TKAYRC3

iTrader: (8)

We kept tuning on the front end & got the 60ft down from 1.50's to 1.40 mostly playing with the shocks and ride height. The car needs a better gear.

i think a spool with 4.30's may do the trick.. and the car is a pig 3400# with me in it.

CamaroRacing12

iTrader: (5)

3400# isnt crazy heavy but u could cut some weight from her

DarkJuggalo

iTrader: (6)

looks like its runnin good =)

Noyzee

iTrader: (37)

car looks good. nice run. looks like you may be able to tighten her down a tad and keep choppin the 60's. nice, clean runs

TKAYRC3

iTrader: (8)

Thanks guys!!

Firehawk441

iTrader: (41)

Nice run.

TKAYRC3

iTrader: (8)

Thank you