Dominator 2 results on 2000 Z28
#1
LS1TECH Sponsor
Thread Starter
iTrader: (6)
Join Date: Nov 2001
Location: Reading, PA
Posts: 2,102
Likes: 0
Received 0 Likes
on
0 Posts
Dominator 2 results on 2000 Z28
Customer brought in a 2000 Z28 with 60k on the clock. It was bone stock. We added ARH headers, ORY, Magnaflow CB, U/D Pulley, Air Lid, 85mm MAF and the Dominator 2 cam. It put down 402 rwhp and 397 rwtq. Overall I was happy with the numbers given the fact that he still has the LS1 intake on there. I think with a ported FAST 92/92 he should be right in the 420 area. Nice torque curve on this one.
Mike
Mike
#4
On The Tree
iTrader: (1)
Join Date: Jul 2002
Location: HARRISBURG, PA
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Nice #'s Mikey. I talked my buddy with the Z. I told him about the one you did, he was impressed. Hes pretty busy right now, but i think he'll be in sometime.
Damn......Intake and Heads would be just dandy on my red one
.
Damn......Intake and Heads would be just dandy on my red one
.
#7
Race your car!
iTrader: (50)
Pewter, you just need to buy that cam from Rapid and toss it in your car, just make sure the lift will work with your heads.
That, would be a real good start to getting you to where you want to be. Put it this way, you put that cam in the car and it still doesn't make the power you want, that will be all the proof you need as to the source of the problem (junk patriot heads cough)
That, would be a real good start to getting you to where you want to be. Put it this way, you put that cam in the car and it still doesn't make the power you want, that will be all the proof you need as to the source of the problem (junk patriot heads cough)