86 IROC

iTrader: (14)

I can't find one anywhere, been to pep boys, napa, carquest, advanced, vatozone, etc.

This is the SOB in question... right front turn signal socket.





I believe I have my car sold, need to resolve this issue so I can close the deal.

Thanks in advance.

FBodyPerformer

iTrader: (19)

Let me know when you find out lol

86 IROC

iTrader: (14)

Found one on Rock Auto's web site, had to order it. They are about $45 + shipping FYI.

2001somws.6

iTrader: (1)

I found them on gmpartsdirect.com Its 40 dollars. Listed under front lamps.

OreoLt1

iTrader: (11)

They have them at Autozone, Oreillys, etc for less than $20
If you look them up in the stores computer they won't be the correct p/n but if you match them up with thats on their shelves they will work just fine.

I got a pair from autozone and work just as OE but hell of a lot less in price. I think on the package it will say GM stop lamp socket but it is the exact same and takes a 3157K bulb as the OE corner lamp socket does.

Trevor.j

iTrader: (10)

yea i have bought them from autozone, i know they carry them

9911UZ28

iTrader: (4)

https://www.dormanproducts.com/cgi-b...cal,Electrical

Is this it?

86 IROC

iTrader: (14)

None of the local stores between Daytona and Longwood had anything. I wasted 3 hours of my day looking, and every place I stopped acted like I was looking for some rare part. Oh well, it has already shipped and is a GM part... live and learn.

kwiksilverz28

iTrader: (7)

I swear I used to have one in my box. I got it in the HELP section at one of them. I looked and I must have used it on the GTA.....

I would have hunted LKQ in Daytona till I found one I could have used.... Speaking of... I enjoy yard hunting. Wish I could find an av like mine with 243 heads for a song! lol

2001somws.6

iTrader: (1)

Were did you get the part from? Let me know if its the right part. Id like to swap mine out.

LS6427

iTrader: (2)

I just did mine 3 weeks ago....both sockets including butt connectors and bulbs.....around $20.00 total. The sockets are $5.99 each and they are very good quality. PepBoys and Advance have them as well as AZ.

Check this thread out, save a ton of money.
https://ls1tech.com/forums/general-m...ht=blinker+fix

.

TransAmusaf

Likewise I've done mine. Id suggest putting electrical grease (same thing u put around spark plugs so it doesnt corrode. they are known to corrode quickly due to poor design. I got mine at autozone also, along with bulbs.

2001somws.6

iTrader: (1)

Thanks for the tip. Im doing mine this weekend.

AW794

iTrader: (7)

You guys are crazy... go to your local salvage yard. I spent 4 bucks on 2 oem sockets

FBodyPerformer

iTrader: (19)

Well before I replace the sockets I need to replace the cracked housing they go in so water doesnt get in.

Actually does anyone know of how I can do some kind of bypass for the front turn signals? I was thinking of pulling them out and doing some kind of air vent to the brakes but I still want the rear turn signals to work. Anyone know how?

BeeJay

Orielys, They have them mislabled but i replaced both of mine from there.

2001somws.6

iTrader: (1)

I found one at a advance auto and paid just under 10 bucks. The part number is 85881. Im going to get one more and be done with this issue.

Joshiedoom

iTrader: (4)

They are regular GM taillight sockets. All autostores have them. Dont be like toyota and trust a computer(lol) to tell you whether is on a wall or not when you can do it the old fashion way and look.

2001somws.6

iTrader: (1)

I just the second one and its getting done saturday.

FBodyPerformer

iTrader: (19)

Does anyone have an answer about my question about bypassing the turn signals with some kind of resistor?