NEEDED: Good dremel operator
#1
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Oct 2006
Location: The Plywood State
Posts: 492
Likes: 0
Received 0 Likes
on
0 Posts
NEEDED: Good dremel operator
Hello,
I need your help. The cuts I made for my trap door are all jagged and bent to hell. I need someone to go just outside the perimeter of my cuts with a dremel tool so that I can put a proper trap door in (I want to use an electrical box cover.)
Willing to pay $$$ for this assistance. Someone in/close to the Orlando area would be swell.
Thanks in advance.
I need your help. The cuts I made for my trap door are all jagged and bent to hell. I need someone to go just outside the perimeter of my cuts with a dremel tool so that I can put a proper trap door in (I want to use an electrical box cover.)
Willing to pay $$$ for this assistance. Someone in/close to the Orlando area would be swell.
Thanks in advance.
#6
Scratch the dremel. Get a cut off tool, or even better 4" grinder with a cutting wheel. If you ever use the 4" grinder, you'll never use anything else. Very stable and cutting its *** off. All this assuming you have room.