Forced Induction Superchargers | Turbochargers | Intercoolers

ATI inlet hat question

Old 01-15-2009, 10:13 PM
  #1  
TECH Enthusiast
Thread Starter
iTrader: (17)
 
nvmy2000ss's Avatar
 
Join Date: May 2005
Location: Brentwood CA
Posts: 607
Received 0 Likes on 0 Posts

Default ATI inlet hat question

Did a search with no luck. Maybe Im typing in the wrong things but anyway, I was wondering if anyone has the part # for the smaller filter where the bypass recirculates.
Old 01-15-2009, 10:20 PM
  #2  
TECH Cry Baby BOSS APPROVED!
iTrader: (5)
 
Urban Legend's Avatar
 
Join Date: Jul 2005
Posts: 5,799
Likes: 0
Received 2 Likes on 2 Posts
Default

There is no standard part number. Plus the filter size will vary depending on circumstances as if you are lowered or stock, etc. Just measure the opening and go to the k and n website and order whatever you can get away with.

I tell you this though; I lost one of those filters because it was too big and my car was lowered. The filter was closer to the ground than the air dam. So watch out for that.
Old 01-16-2009, 12:25 PM
  #3  
8 sec potential, 12 sec slip
iTrader: (50)
 
ChevyChad's Avatar
 
Join Date: Apr 2002
Location: Savannah, GA
Posts: 4,093
Likes: 0
Received 2 Likes on 2 Posts

Default

Yea, mine came off too for the same reason. I just cut that little tube off and duct taped over it now LOL
Old 01-16-2009, 12:41 PM
  #4  
TECH Cry Baby BOSS APPROVED!
iTrader: (5)
 
Urban Legend's Avatar
 
Join Date: Jul 2005
Posts: 5,799
Likes: 0
Received 2 Likes on 2 Posts
Default

Or you can go to home depot and buy a cap and plug it forever.


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:27 PM.