Gto blower in fbody (need quik answer)
03-02-2009, 08:05 PM
#1
TECH Apprentice
Thread Starter
Join Date: Nov 2007
Location: DelrayBeach/Tampa,Florida
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Gto blower in fbody (need quik answer) Sorry if this has been covered i searched and didint find anything conclusive. Will a Eaton m112 from a ls1 gto fit in a fbody, what type of modding is required if not ,Thank you in advance.
03-02-2009, 08:08 PM
#2
It's up to the positioning of the jack-shaft compared to the one for the F-bodies, but I believe they're in the same place. If the inlet comes straight forward (which I believe it does) then you should be ok. I sold my MP112 off my Vette to a guy with an F-body.
03-02-2009, 09:45 PM
#4
I've seen pics of a KB with a vette drive system, fitted into a Camaro. The center of the cowl was trimmed up to the windshield. Nothing but wasted space anyway. The passenger side wiper arm would need to be relocated to the side and a shorter arm used.
03-03-2009, 05:50 PM
#6
TECH Apprentice
Thread Starter
Join Date: Nov 2007
Location: DelrayBeach/Tampa,Florida
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
it looks like it is ofset enogh foward to possibly clear but im not sure.....its the same as the maggie charger for the 01 vette? just curiosu before i try to buy it
