Camaro SS F1-C Build
#62
FormerVendor
iTrader: (45)
Ok numbers are in.
With SDCE 7.25" crank pulley and 5.25" ATI blower pulley, the car made 9.5psi at 6,500 RPMs. At 13 deg of timing, the car made 643rwhp 536rwtq. The HP was still headed north when we let off. The 60lbers that went in this AM are currently fed by a single pump, and the injectors hit 100% @ 6500 because of low fuel pressure.
With SDCE 7.25" crank pulley and 5.25" ATI blower pulley, the car made 9.5psi at 6,500 RPMs. At 13 deg of timing, the car made 643rwhp 536rwtq. The HP was still headed north when we let off. The 60lbers that went in this AM are currently fed by a single pump, and the injectors hit 100% @ 6500 because of low fuel pressure.
#67
Launching!
iTrader: (5)
Join Date: Jun 2007
Location: Richmond, VA
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
I had a blast last night despite the cold and scare of a ton of methanol under the car... I was extremely pleased w/ the numbers (and a little concerned for the bottom end) But thank you to everyone who helped the car along