need some vacuum and oil line routing help.
#1
need some vacuum and oil line routing help.
ok well im going to have a friend fab up my twin turbo kit real soon. and i would like to know how am i going to route the vaccum lines for the boost control. i am running twin t62 garretts, twin tial 38mm waste gates, and a 50mm tial bov, manual boost controller and a autometer gauge and victor jr intake. any good info will be apprciated.
and for the oil lines well im running a moroso oil pan so i have an oil filter relo kit. and i would like run an oil cooler as well. and for the oil pressure im going to get that from the top of the rearside of the block.
any good info will be very appriciated thanks for your time.
and for the oil lines well im running a moroso oil pan so i have an oil filter relo kit. and i would like run an oil cooler as well. and for the oil pressure im going to get that from the top of the rearside of the block.
any good info will be very appriciated thanks for your time.
#3
On The Tree
Join Date: Feb 2009
Location: Rhode Island. (new hampshire)
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
for your wastegate referance, use a source from your intake manifold. Such as where the pcv goes. One of the nipples right behind the throttle body