Cam Advice...
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Aug 2007
Location: seabrook
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Cam Advice...
I have a 2002 Z And it is going to be driven on the street with quite a bit of track time as well, just curious what cam some of you think i should run with my setup...
6.0 iron block to 408 c.i. around 9.25 comp.
Eagle H beam rods
Eagle Forged Crank
Diamond pistons
Trick flow 235's
Crane Steel Billet lifters
Crane 9 key way adjustable timing chain
Moroso deep pan
Edelbrock vic jr manifold w/elbow
74 mm Borg Warner Turbo Gonna run around 15 psi..
31x12x4 CX intercooler
Car has a 9" Ford with a 350 gear and 275/60/15 mickey DR And built 4l60e with ATI converter...
Thank you!
6.0 iron block to 408 c.i. around 9.25 comp.
Eagle H beam rods
Eagle Forged Crank
Diamond pistons
Trick flow 235's
Crane Steel Billet lifters
Crane 9 key way adjustable timing chain
Moroso deep pan
Edelbrock vic jr manifold w/elbow
74 mm Borg Warner Turbo Gonna run around 15 psi..
31x12x4 CX intercooler
Car has a 9" Ford with a 350 gear and 275/60/15 mickey DR And built 4l60e with ATI converter...
Thank you!