Quick question - 6 Rib Standoffs?
03-06-2010, 03:47 AM
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Sep 2005
Location: USA
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Quick question - 6 Rib Standoffs? Hey guys just a quick question about the standoffs that come with the older 6-rib P1 kit...
One of the standoffs is 2.4" and the other 2.5" and I don't know which one goes where on the alternator. I bought the kit used so I don't have specific installation instructions. I checked the set of instructions EPP has on their site, but they don't mention anything about a 2.4" standoff...
any help is appreciated, thanks
One of the standoffs is 2.4" and the other 2.5" and I don't know which one goes where on the alternator. I bought the kit used so I don't have specific installation instructions. I checked the set of instructions EPP has on their site, but they don't mention anything about a 2.4" standoff...
any help is appreciated, thanks
03-06-2010, 05:14 AM
#2
Teching In
iTrader: (1)
Join Date: May 2005
Location: waterford mi
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
The 2.4 should be the lower one. Its shorter because of the trans line mounting tab is about .100 thick. If you have a 6 speed you will need another 2.5 standoff.
