AES 317 6.0 Heads full machined castings
#1
AES 317 6.0 Heads full machined castings
Another Introductory deal from AES - 5 sets ONLY
Casting number 317 6.0 LQ9 heads
decked to 70cc chamber
5 Angle Valve job
hand polished ports
bowl blended
No core charge. outright purchase.
You can swap your existing hardware to these heads.
$599 shipped bare
*update*
$999 shipped, Assembled complete with 2.02"/1.57" Stainless Vavles, .650" gold dual springs
Great deal if you're looking to lower compression while adding
boost on your LS engine.
Flow Numbers, 4.030" test bore w/ 2.00"/1.55" stock valves
Intake Exhaust
.100 64.3 57.5
.200 127.4 114.9
.300 189.1 154.7
.400 239.3 186.1
.500 271.0 201.5
.600 281.7 207.2
.650 276.0 208.4
.700 270.3 209.7
PM or email for more details!
*shipped to lower 48
Heres some pics of the heads being machined.
Casting number 317 6.0 LQ9 heads
decked to 70cc chamber
5 Angle Valve job
hand polished ports
bowl blended
No core charge. outright purchase.
You can swap your existing hardware to these heads.
$599 shipped bare
*update*
$999 shipped, Assembled complete with 2.02"/1.57" Stainless Vavles, .650" gold dual springs
Great deal if you're looking to lower compression while adding
boost on your LS engine.
Flow Numbers, 4.030" test bore w/ 2.00"/1.55" stock valves
Intake Exhaust
.100 64.3 57.5
.200 127.4 114.9
.300 189.1 154.7
.400 239.3 186.1
.500 271.0 201.5
.600 281.7 207.2
.650 276.0 208.4
.700 270.3 209.7
PM or email for more details!
*shipped to lower 48
Heres some pics of the heads being machined.
Last edited by AES Racing; 03-12-2010 at 03:46 PM.
Trending Topics
#10
Flow Numbers, 4.030" test bore
Intake Exhaust
.100 64.3 57.5
.200 127.4 114.9
.300 189.1 154.7
.400 239.3 186.1
.500 271.0 201.5
.600 281.7 207.2
.650 276.0 208.4
.700 270.3 209.7
This is with 2.000" / 1.55" valves, the complete heads we're selling with 2.02"/1.57" valves that should pickup 5-7 cfm above these numbers
Stock head flow numbers
0.100 76 57
0.200 145 115
0.300 200 152
0.400 236 173
0.500 252 188
0.600 263 198
We're not advertising these as the worldbeater ported head, however we've been able to
improve these heads by adding the best flowing angles on the valve seats and cleaning up the ports.
Intake Exhaust
.100 64.3 57.5
.200 127.4 114.9
.300 189.1 154.7
.400 239.3 186.1
.500 271.0 201.5
.600 281.7 207.2
.650 276.0 208.4
.700 270.3 209.7
This is with 2.000" / 1.55" valves, the complete heads we're selling with 2.02"/1.57" valves that should pickup 5-7 cfm above these numbers
Stock head flow numbers
0.100 76 57
0.200 145 115
0.300 200 152
0.400 236 173
0.500 252 188
0.600 263 198
We're not advertising these as the worldbeater ported head, however we've been able to
improve these heads by adding the best flowing angles on the valve seats and cleaning up the ports.
Last edited by AES Racing; 03-14-2010 at 01:18 AM.