twins here i come,need help.
05-12-2010, 08:08 PM
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Jan 2010
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
twins here i come,need help. ok i've decided going twin turbo for my project and need some input. its a 01 stock ls1 w/4l60e. gonna use c6 manifolds and a turbo cam.any suggestions on a cam? i want something thats sounds mean. its going into a 70 chevy truck so smog is not an issue. im gonna keep the bottom end stock for now untill i can afford to bulid it up or this one goes
. looking for 550-600 hp for now. the truck is used for street driving and car shows so i want something thats gonna spool fast. It might see the track once or twice a year if that. what turbos do you guys reccomend for me. also what guage and size should i go with. i was thinking 2.5" od tubing for the hot side but not sure of the guage. And where can i buy some misc bends. thanks kev
. looking for 550-600 hp for now. the truck is used for street driving and car shows so i want something thats gonna spool fast. It might see the track once or twice a year if that. what turbos do you guys reccomend for me. also what guage and size should i go with. i was thinking 2.5" od tubing for the hot side but not sure of the guage. And where can i buy some misc bends. thanks kev 
05-12-2010, 09:26 PM
#2
epp blower cam sounds sick and the higher duration would bleed a little boost and be nicer to your bottom end is how Louis @ LGM discribed it to me. More overlap, more bleadage.
Contact a sponsor on turbos.
Contact a sponsor on turbos.
