stock 6.0 truck crank power levels
06-23-2010, 08:02 AM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: May 2010
Location: Cincinnati
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
stock 6.0 truck crank power levels Will the stock 6.0L truck crank hold up to my power level? I would like to put down between 700-800RWHP. I've heard of them pushing more but I would like a reliable street setup.
06-23-2010, 08:41 AM
#4
Teching In
Thread Starter
iTrader: (2)
Join Date: May 2010
Location: Cincinnati
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Funny, I just called Callies about a Magnum stock stroke carnk and he said 800-1000 on it. and the compstar I beams he wouldn't push past 750-800 and they are 2 steps up from the H-beams everyone rates to 800 with arp2000 bolts.
06-24-2010, 03:47 PM
#7
There are plenty of people pushing stock cranks beyond 1000rwhp. Mike Brown went mid 8's with one for a few seasons in an LS2 alum block with forged rods/pistons and out of the box AFR 225 heads.
There was also a video of an LSx block with stock crank making 2000hp with turbos on either StreetFire or YouTube on an engine dyno.
You would be hard pressed to find ANY stock crank failures in boosted applications on here. They may flex a little at super high boost but up to 1000rwhp ..... but unless you want a longer stroke I'd say you are wasting your $$$.
There was also a video of an LSx block with stock crank making 2000hp with turbos on either StreetFire or YouTube on an engine dyno.
You would be hard pressed to find ANY stock crank failures in boosted applications on here. They may flex a little at super high boost but up to 1000rwhp ..... but unless you want a longer stroke I'd say you are wasting your $$$.
