My GT55 Single kit is done... Pic's inside
07-22-2010, 07:57 PM
#1
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
My GT55 Single kit is done... Pic's inside Car is 100% together now -- just working on the tuning to get it fired up 
Once she is up and running and we get a few bugs worked out (There are bound to be some) we will post up when she will be out at a track
Here are a few pics from yesterday all back together:
was down at the shop today... it is so close it is killing me... bet it will be at the as soon as the tune is done.
Once she is up and running and we get a few bugs worked out (There are bound to be some) we will post up when she will be out at a track Here are a few pics from yesterday all back together:
was down at the shop today... it is so close it is killing me... bet it will be at the as soon as the tune is done.
Last edited by atomicfusion; 07-22-2010 at 08:03 PM.
07-22-2010, 08:17 PM
#4
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
07-22-2010, 08:17 PM
#5
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
07-22-2010, 09:11 PM
#8
I am straight loving that 5" downpipe all the way down to the rear turndown, and its polished, BOLLA !!! Can you tell me what brand muffler your using, also what's the name/brand of those bars you used to support the turbo, the things that look like fbody rear control arms, thanks.
07-22-2010, 09:21 PM
#9
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
It is just a 5" race bullet... not sure of the brand, but if you call IPSMotorsports they can tell you, as for the supports, we parted out a couple f-bodies and had them left over, JK but they are custom tie rod's welded in.
Last edited by smokinHawk; 07-23-2010 at 07:20 AM. Reason: nonsponser url
Congrats man and like always IPS did a sick work.. 
07-22-2010, 11:43 PM
#17
10 Second Club
iTrader: (27)
Join Date: Nov 2006
Location: Connecticut
Posts: 1,905
Likes: 0
Received 0 Likes
on
0 Posts
I don't care what anyone says...this is the sickest LS car i've ever seen. Makes my car equivalent to an 89 Civic. The exhaust almost looks like the APU on an F18 fighter jet.
Last edited by Snyper; 07-23-2010 at 12:55 AM.
07-23-2010, 09:03 AM
#20
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Yes, custom made by IPSMotorsports
IPS put the fuel system together, but there are 2 aeromotive 1000 pumps in the rear and 220lb injectors.
There is a build thread here as well as on some other forums.
There is a build thread here as well as on some other forums.
