Took the GT55 Turbo Z06 to the track tonight...
#1
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Took the GT55 Turbo Z06 to the track tonight...
Took the car out for some low boost testing... we changed the waste gate springs out to 8.7lb springs and ran on 9lbs of boost tonight.
60's were much better, running a best of 1.34 and a worst of 1.41 on the full passes.
ET's were doing pretty good for the power we were running as well... the full passes were between 9.12 and 9.19. We did have a couple of early partial passes that were only 10.2 and 9.8 but once I got comfortable with the new setup it was very consistant.
We will be out again next weekend and plan on ramping up the boost to see what the car will do.
tonights best run was 9.12@154 with a 1.34 60'
I will get videos up in the next few days.
Thanks to the guys from IPS for coming out and helping me get the car down the track! was a great time. Not bad for 91 degrees out
60's were much better, running a best of 1.34 and a worst of 1.41 on the full passes.
ET's were doing pretty good for the power we were running as well... the full passes were between 9.12 and 9.19. We did have a couple of early partial passes that were only 10.2 and 9.8 but once I got comfortable with the new setup it was very consistant.
We will be out again next weekend and plan on ramping up the boost to see what the car will do.
tonights best run was 9.12@154 with a 1.34 60'
I will get videos up in the next few days.
Thanks to the guys from IPS for coming out and helping me get the car down the track! was a great time. Not bad for 91 degrees out
Trending Topics
#11
7 Second Club
Thread Starter
Join Date: May 2007
Location: Columbus, Ohio
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
ETP 6 bolt heads
Hoping to get into the 1.2's
Thanks all for the kind word's!