RNation0001

iTrader: (2)

i have a set of diamond 11500 pistons and im wondering if they will be ok for a turbo build im about to start.. its going to be a ironblock 347 with callies compstar rods stock crank and these pistons along with some 317 heads. can anyone lemme know if they have used them before and how they are. and anyone know a ballpark hp i can make with say a t70 or t76 turbo frontmounted?

JAX04

iTrader: (17)

thunder racing says its a nitrous piston if that means anything to ya. "small nitrous applications"

RNation0001

iTrader: (2)

so then i guess it would not be to good for boost im guessing.. anyone know if theres anyway i can trade these in to diamond or anywhere plus some cash for someboost pistons

Gonoma

iTrader: (15)

you will be limited to the amount of boost you can run with a flat top piston. best to try and get a hold of some dish pistons with more -cc's

RNation0001

iTrader: (2)

Well I had planned on running 317 heads and ls9 gaskets I figured it would take the compression down enough to run some good boost numbers. Anyone have some boost pistons they would liketo trade mine r brand new in box. Wouldn't mind havin some 6.0 pistons but it's whatever

black98ws6ta

iTrader: (77)

Those pistons will be fine to make decent power on with a good tune.

RNation0001

iTrader: (2)

will 600 to 650 hp be do able with this setup?

black98ws6ta

iTrader: (77)

With a good tune they will be fine at that power level.

RNation0001

iTrader: (2)

Thanks I really appreciate it.