396375

iTrader: (10)

I'm looking to run a simple boost solinoid to give me 10#s on the line and then hit 16#s once on the move.Has anyone done this recently and how did it work?Which solinoid did you use?
Thanks

skinnies

iTrader: (33)

I do it, use a manual boost controller inline with a GM boost solenoid(from typhoon), then when I hit the button on my steering wheel it goes from low boost to high boost.

Phil99vette

iTrader: (11)

I've got a MBC setup out in the shop brand new if your interested. $25 to your door.

396375

iTrader: (10)

Thanks.I already have an RJC boost control valve.I'm looking for a electronic solinoid that will go from low to high boost with a switch.

396375

iTrader: (10)

What is your low and high boost settings and are they adjustable?How did you setup up your hoses?Dosen't the Typhoon solinoid need a signal from an ECM to work or is it just 12 volts?
Thanks

skinnies

iTrader: (33)

Just needs 12 volts, the low setting is whatever spring you have on it and the high setting is whatever you set the manual boost controller at.

Lines are simple, put a Y before the noid and mbc on one side of the Y and just straight hose on the other. The noid is 3 port, very simple.

skinnies

iTrader: (33)

Just needs 12 volts, the low setting is whatever spring you have on it and the high setting is whatever you set the manual boost controller at.

Lines are simple, put a Y before the noid and mbc on one side of the Y and just straight hose on the other. The noid is 3 port, very simple.

396375

iTrader: (10)

Thanks guys.

Phil99vette

iTrader: (11)

If u need a valve call seb at nlr the guys that make the ams-1000...u might need 2, one to put the pressre on and one to release.

bad6as

iTrader: (17)

get a ams-500

396375

iTrader: (10)

I'll be getting a 1000 this winter.I just need something simple to get me off the line till the end of the season.
Thanks