_Adrenaline_

iTrader: (4)

Few dumb questions...

1st. How close can the MAF be to the throttle body? Im guessing pretty close considering on fbodys its right in front.

2nd. Could the stock air intake elbow could hold <10lbs of boost?

3rd. 1 gauge wire good enough to relocate battery? I think if i relocate it i wont need to replace the fans.

4th. Where do i get a crank pulley for a stock balancer?

Bob@BruteSpeed

iTrader: (16)

The MAF can be close, it is not a problem.

The stock air intake can be used, it expands quite a bit though.

1 gauge for the battery will be sufficient.

Here is a link to a copy of the ProCharger installation instruction that a customer of mine posted many years ago, they may help you out.
http://www.blackgto.com/2004_GTO_ATI_ProCharger.pdf

I'll get back with you on the crank pulley. Bob

Bob@BruteSpeed

iTrader: (16)

http://shop.brutespeed.com/ATI-DC033...DC033A-008.htm

Here is the GTO PtoCharger stock balancer. Bob