Pics of BWS400?
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Tucson, AZ
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Pics of BWS400?
So I pulled my 347 and bought a 6.0 for my build. Cut the Radiator support to mount the Radiator up right. My question is, I have a Borg Warner s400 series turbo with the t6 housing, Where did you guys mount your turbo? I have seen a couple, but most are almost touching the radiator (with pusher fans), and I have puller fans on mine. So if you guys have any pics of how you mounted your turbo I would appreciate some help. This will be on an F-body with a truck manifold build.
#2
I don't have any pics but a search will help u a lot on this as there are quite a few guys running large snails between the radiator and motor. I have a vertical rad with pushers (which I suggest you do as well if you're that concerned about space) it will be a tight fit with pullers regardless if you mount the turbo up high or down low. I'm sure it can be done with a little creative thinking but pushers are the easier route imo...gl.
#3
https://ls1tech.com/forums/forced-in...ting-when.html
Scroll down about 6 responses there is a pic of one installed there
Scroll down about 6 responses there is a pic of one installed there
#4
On The Tree
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Tucson, AZ
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/forced-in...ting-when.html
Scroll down about 6 responses there is a pic of one installed there
Scroll down about 6 responses there is a pic of one installed there
looking for a Fbody with truck manifold
#5
On The Tree
Thread Starter
iTrader: (7)
Join Date: Mar 2008
Location: Tucson, AZ
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
I don't have any pics but a search will help u a lot on this as there are quite a few guys running large snails between the radiator and motor. I have a vertical rad with pushers (which I suggest you do as well if you're that concerned about space) it will be a tight fit with pullers regardless if you mount the turbo up high or down low. I'm sure it can be done with a little creative thinking but pushers are the easier route imo...gl.
some of these have done that, but all have custom headers