Build Thread For New LS BMF Outlaw Drag Radial......
02-16-2011, 02:50 PM
#41
8 Second Club
iTrader: (1)
Join Date: Nov 2001
Location: Friendswood
Posts: 10,121
Likes: 0
Received 0 Likes
on
0 Posts
There is already a couple of ls powered cars that have ran in the 6's, but wasn't done on stock style suspension.
Lsx fast list
http://www.planetlsx.com/vehicles/10..._All_Time_/147
Lsx fast list
http://www.planetlsx.com/vehicles/10..._All_Time_/147
02-16-2011, 03:05 PM
#43
FormerVendor
02-16-2011, 07:42 PM
#46
10 Second Club
Thread Starter
Join Date: May 2008
Location: Cleveland GA USA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
02-16-2011, 08:07 PM
#47
Staging Lane
iTrader: (1)
Join Date: Feb 2011
Location: minnesota
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Ha Keith your funny
talked to Tood the other day im sending him a 5.4 Ford manifold for a new mile project I got going on....Good luck with the build, im sure it will be sick!!! Sounds like we might get him some carbon parts for the stang to
Dan
talked to Tood the other day im sending him a 5.4 Ford manifold for a new mile project I got going on....Good luck with the build, im sure it will be sick!!! Sounds like we might get him some carbon parts for the stang toDan
02-17-2011, 08:14 AM
#48
10 Second Club
Thread Starter
Join Date: May 2008
Location: Cleveland GA USA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
02-17-2011, 08:23 AM
#49
FormerVendor
02-17-2011, 10:57 PM
#55
7 Second Club
iTrader: (18)
Join Date: Mar 2004
Location: Cincinnati, Ohio
Posts: 790
Likes: 0
Received 0 Likes
on
0 Posts
Well...let's see...no pressure on us because
1) We (Mike and I, Stevie retired after last season) aint scared
2) We do our own fabrication
3) We do our own welding (for the most part)
4) We do our own machining (grinder in a vice)
5) We do our own MNC (manually controlled machining center which is a grinder in a vice at different angles)
lmao
6) We do our own vehicle assy
7) We do our own engine tuning
8) We do our own chassis tuning
9) So......Woooooooooo!
Wait till you see our Intake Elbows (they are literally BMF'rs,lol)
Of course all this with fantastic support from our Sponsors!
Mark
1) We (Mike and I, Stevie retired after last season) aint scared
2) We do our own fabrication
3) We do our own welding (for the most part)
4) We do our own machining (grinder in a vice)
5) We do our own MNC (manually controlled machining center which is a grinder in a vice at different angles)
lmao6) We do our own vehicle assy
7) We do our own engine tuning
8) We do our own chassis tuning
9) So......Woooooooooo!
Wait till you see our Intake Elbows (they are literally BMF'rs,lol)
Of course all this with fantastic support from our Sponsors!
Mark
02-18-2011, 07:43 AM
#58
10 Second Club
Thread Starter
Join Date: May 2008
Location: Cleveland GA USA
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
Well...let's see...no pressure on us because
1) We (Mike and I, Stevie retired after last season) aint scared
2) We do our own fabrication
3) We do our own welding (for the most part)
4) We do our own machining (grinder in a vice)
5) We do our own MNC (manually controlled machining center which is a grinder in a vice at different angles) lmao
6) We do our own vehicle assy
7) We do our own engine tuning
8) We do our own chassis tuning
9) So......Woooooooooo!
Wait till you see our Intake Elbows (they are literally BMF'rs,lol)
Of course all this with fantastic support from our Sponsors!
Mark
1) We (Mike and I, Stevie retired after last season) aint scared
2) We do our own fabrication
3) We do our own welding (for the most part)
4) We do our own machining (grinder in a vice)
5) We do our own MNC (manually controlled machining center which is a grinder in a vice at different angles)
lmao6) We do our own vehicle assy
7) We do our own engine tuning
8) We do our own chassis tuning
9) So......Woooooooooo!
Wait till you see our Intake Elbows (they are literally BMF'rs,lol)
Of course all this with fantastic support from our Sponsors!
Mark
LOL! Damn Buckeye's
02-18-2011, 08:12 AM
#59
that is some funny ****!! MNC
Well...let's see...no pressure on us because
1) We (Mike and I, Stevie retired after last season) aint scared
2) We do our own fabrication
3) We do our own welding (for the most part)
4) We do our own machining (grinder in a vice)
5) We do our own MNC (manually controlled machining center which is a grinder in a vice at different angles) lmao
6) We do our own vehicle assy
7) We do our own engine tuning
8) We do our own chassis tuning
9) So......Woooooooooo!
Wait till you see our Intake Elbows (they are literally BMF'rs,lol)
Of course all this with fantastic support from our Sponsors!
Mark
1) We (Mike and I, Stevie retired after last season) aint scared
2) We do our own fabrication
3) We do our own welding (for the most part)
4) We do our own machining (grinder in a vice)
5) We do our own MNC (manually controlled machining center which is a grinder in a vice at different angles)
lmao6) We do our own vehicle assy
7) We do our own engine tuning
8) We do our own chassis tuning
9) So......Woooooooooo!
Wait till you see our Intake Elbows (they are literally BMF'rs,lol)
Of course all this with fantastic support from our Sponsors!
Mark
02-18-2011, 08:15 AM
#60
TECH Senior Member
iTrader: (21)
Join Date: Nov 2001
Location: Cecil County Raceway!!!
Posts: 8,484
Likes: 0
Received 0 Likes
on
0 Posts
Well...let's see...no pressure on us because
1) We (Mike and I, Stevie retired after last season) aint scared
2) We do our own fabrication
3) We do our own welding (for the most part)
4) We do our own machining (grinder in a vice)
5) We do our own MNC (manually controlled machining center which is a grinder in a vice at different angles) lmao
6) We do our own vehicle assy
7) We do our own engine tuning
8) We do our own chassis tuning
9) So......Woooooooooo!
Wait till you see our Intake Elbows (they are literally BMF'rs,lol)
Of course all this with fantastic support from our Sponsors!
Mark
1) We (Mike and I, Stevie retired after last season) aint scared
2) We do our own fabrication
3) We do our own welding (for the most part)
4) We do our own machining (grinder in a vice)
5) We do our own MNC (manually controlled machining center which is a grinder in a vice at different angles)
lmao6) We do our own vehicle assy
7) We do our own engine tuning
8) We do our own chassis tuning
9) So......Woooooooooo!
Wait till you see our Intake Elbows (they are literally BMF'rs,lol)
Of course all this with fantastic support from our Sponsors!
Mark
