LS3 or maybe ls2 conversion guys any problems with PO327 knock sensor code?
08-15-2011, 10:05 PM
#1
LS3 or maybe ls2 conversion guys any problems with PO327 knock sensor code? My 427 swap is working good but getting PO 327 sometimes. I had to relocate the knock sensors of course to side of block and got extension harnesses. I can't realy get to the connectors in back of block now with engine in there and think am connected on the sensors good. But think heard need to desensitize the knock sensors for the new locations?
I have not tried playing in hptuners yet. I realize this might be more a tuning question but pretty sure this happens from the boost so thats why posting it here.
Not quite sure which side is which either after doing the harness extension.Guess could unplug one completely and see if can get the other side code to come on. Then at least know what side is what.
I have not tried playing in hptuners yet. I realize this might be more a tuning question but pretty sure this happens from the boost so thats why posting it here.
Not quite sure which side is which either after doing the harness extension.Guess could unplug one completely and see if can get the other side code to come on. Then at least know what side is what.
