Procharged Stock Shortblock LS6 - LS1TECH

Go Back   LS1TECH > LS1-LS2-LS3-LS6-LS7 PERFORMANCE > Forced Induction
Sign in using an external account
Register Forgot Password?
Search


Forced Induction
Superchargers | Turbochargers | Intercoolers
Sponsored by
RPM Motorsports

Procharged Stock Shortblock LS6

Reply
 
Thread Tools Search this Thread
Old 04-16-2012, 02:03 PM   #1
Deep South Dir
 
MrDavid's Avatar
 
Trader Rating: 11
Join Date: Sep 2006
Location: Upstate, SC
Posts: 540
Default Procharged Stock Shortblock LS6

Finally took my Z to the dyno tonight for a few pulls then a street tune afterwards. Car made around 680 on the second pull (1st pull had air in the meth line) so we decided to let the car cool off for a while, throw a bag of ice on the intake and cool it off too, then take the hat off the blower just to see what it would do. Bumped up the timing to 22* (for just a single pull) and let it rip for the last pass.

Pretty impressed when I saw the dyno chart afterwards

http://youtu.be/2KWs00zNbFA

Had to tape it on my phone. It's a 1080p video, but a little blurry at the end. Last pull is the middle one.

Click the image to open in full size.


Setup:
2001 C5 Z06
113k mile stock shortblock
Trickflow heads w/LS9 gaskets
F13 cam
D1SC Procharger @ 10-11psi
93 octane w/ SNOW Stage II Meth kit
Custom Dyno Tune from V8muscle.net
__________________
Sold - NBM 2000 TA M6 Forged H/C LS6 347 | D1SC | TICK T-56 | 728/646
Sold - 2001 QuickSilver Z06 H/C D1SC Procharged | 742/619 (10psi stock shortblock)
Imperial Blue 2007 TBSS 3SS
MrDavid is offline   Reply With Quote
Old 04-16-2012, 02:38 PM   #2
UNDER PRESSURE MOD
 
The Alchemist's Avatar
 
Trader Rating: 19
Join Date: Nov 2001
Location: Buckingham PA
Posts: 9,735
Send a message via AIM to The Alchemist
Default

Be careful with that much timing on a stock shortblock, but I know you said it was a one time only pull. How much timing are you normally running on the street.

Great numbers by the way.
__________________

Forged Thompson Motorsport LS3, Procharger, Aquamist, 19" CCW T10s. BLS V2 lights. It only makes a few pounds of boost. New build coming soon.
https://www.facebook.com/TheOriginalAlchemist?fref=nf
http://www.youtube.com/user/LaswellB
For all things Boosted LSX https://www.facebook.com/groups/boostedlsx/
The Alchemist is offline   Reply With Quote
Old 04-16-2012, 05:16 PM   #3
Deep South Dir
 
MrDavid's Avatar
 
Trader Rating: 11
Join Date: Sep 2006
Location: Upstate, SC
Posts: 540
Default

16* max
__________________
Sold - NBM 2000 TA M6 Forged H/C LS6 347 | D1SC | TICK T-56 | 728/646
Sold - 2001 QuickSilver Z06 H/C D1SC Procharged | 742/619 (10psi stock shortblock)
Imperial Blue 2007 TBSS 3SS
MrDavid is offline   Reply With Quote
Old 04-17-2012, 06:14 AM   #4
LS1Tech Sponsor
 
Bob@BruteSpeed's Avatar
 
Trader Rating: 16
Join Date: Mar 2003
Location: Roanoke, In
Posts: 19,185
Default

Very nice numbers! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076

E-mail: brutespeed@gmail.com


https://www.brutespeed.com/index.htm Link to website


Bob@BruteSpeed is online now   Reply With Quote
Old 04-17-2012, 10:03 AM   #5
Deep South Dir
 
MrDavid's Avatar
 
Trader Rating: 11
Join Date: Sep 2006
Location: Upstate, SC
Posts: 540
Default

Thanks Bob, and a special thanks for all of your advice in the past on my current and previous setups.
__________________
Sold - NBM 2000 TA M6 Forged H/C LS6 347 | D1SC | TICK T-56 | 728/646
Sold - 2001 QuickSilver Z06 H/C D1SC Procharged | 742/619 (10psi stock shortblock)
Imperial Blue 2007 TBSS 3SS
MrDavid is offline   Reply With Quote
Old 04-17-2012, 03:24 PM   #6
TECH Addict
 
I8UR4RD's Avatar
 
Trader Rating: 16
Join Date: Oct 2010
Location: Bama
Posts: 2,595
Default

yeah your TA was Awesome and this one is too. I am surprised that 22* was even fathomed. Although I have no room to talk. I have always wondered if we can actually justify the numbers we post with the air hat off since we will never run it like that most likely. that thing is a huge restriction and I am constantly considering trying to make one out of 5ply silicone with a T-bolt and wondering what kind of filter I can put on the front of it that wont get sucked in. so far none have come to mind. you have one badass light car. that thing should be in the 9's somewhere trappin some 140mph. good luck with the shortblock. are you running a lnc 003 two step?
__________________
2002 WS6 -** AES 390 ** Billet 94mm ** STG-5 4L80E ** MWC FAB 9 ** PTC BILLET TRIPLE DISC ** E85 & ALKY ** FIC 2000 **

Thank You!- Midwest Chassis-Shortuning-WS6projectMike-Jakes Peformance. RPP&ELP
I8UR4RD is offline   Reply With Quote
Old 04-17-2012, 04:26 PM   #7
LS1Tech Sponsor
 
Bob@BruteSpeed's Avatar
 
Trader Rating: 16
Join Date: Mar 2003
Location: Roanoke, In
Posts: 19,185
Default

Quote:
Originally Posted by I8UR4RD View Post
yeah your TA was Awesome and this one is too. I am surprised that 22* was even fathomed. Although I have no room to talk. I have always wondered if we can actually justify the numbers we post with the air hat off since we will never run it like that most likely. that thing is a huge restriction and I am constantly considering trying to make one out of 5ply silicone with a T-bolt and wondering what kind of filter I can put on the front of it that wont get sucked in. so far none have come to mind. you have one badass light car. that thing should be in the 9's somewhere trappin some 140mph. good luck with the shortblock. are you running a lnc 003 two step?
From what KP say with his T/A with his hundred of passes at the track, the inlet hat isn't the real problem, it is the filter. KP went with a larger filter and made a scoop under it to direct airflow into the filter, he said he could tell this combination helped in his mph. This might be one of those cases where the dyno numbers will differ from the track results, hard to say. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076

E-mail: brutespeed@gmail.com


https://www.brutespeed.com/index.htm Link to website


Bob@BruteSpeed is online now   Reply With Quote
Old 04-18-2012, 01:04 AM   #8
On The Tree
 
SERB Z06's Avatar
 
Trader Rating: 6
Join Date: Mar 2008
Location: Idaho
Posts: 105
Send a message via AIM to SERB Z06 Send a message via MSN to SERB Z06
Default

Awesome numbers...torque seems low for the mods...too much timing probably?

Where was MBT
SERB Z06 is offline   Reply With Quote
Old 04-18-2012, 06:04 AM   #9
UNDER PRESSURE MOD
 
The Alchemist's Avatar
 
Trader Rating: 19
Join Date: Nov 2001
Location: Buckingham PA
Posts: 9,735
Send a message via AIM to The Alchemist
Default

Quote:
Originally Posted by SERB Z06 View Post
Awesome numbers...torque seems low for the mods...too much timing probably?

Where was MBT
I always thought Prochargers made more hp than torque due to hitting max psi at max rpm so it carries the torque up through the rpm band instead of dropping off after peak torque rpm. I'm sure if he posts a dyno graph, you'll see that it holds the peak torque number pretty far past that rpm, which leads to higher hp numbers than torque.
__________________

Forged Thompson Motorsport LS3, Procharger, Aquamist, 19" CCW T10s. BLS V2 lights. It only makes a few pounds of boost. New build coming soon.
https://www.facebook.com/TheOriginalAlchemist?fref=nf
http://www.youtube.com/user/LaswellB
For all things Boosted LSX https://www.facebook.com/groups/boostedlsx/
The Alchemist is offline   Reply With Quote
Old 04-18-2012, 06:34 AM   #10
Deep South Dir
 
MrDavid's Avatar
 
Trader Rating: 11
Join Date: Sep 2006
Location: Upstate, SC
Posts: 540
Default

Tq is probably a little lower due to some small amount of detonation with that amount of timing. I wish I would have taken the hat off the blower for one of the pulls when it was on 16* to see how much it would have changed. I used to cruise around in my T/A with the hat off the blower a decent bit and always raced with it off. I choose days where weather was nearly perfect to take it out though.

I doubt the car will trap 140. It isn't setup for the track at all. No braces, springs, or two step. It just has new bilstein shocks all around for a more comfortable ride. It will more than likely never make any passes on that tune. The dyno is a little easier on the car than the track will be.
__________________
Sold - NBM 2000 TA M6 Forged H/C LS6 347 | D1SC | TICK T-56 | 728/646
Sold - 2001 QuickSilver Z06 H/C D1SC Procharged | 742/619 (10psi stock shortblock)
Imperial Blue 2007 TBSS 3SS
MrDavid is offline   Reply With Quote
Old 04-18-2012, 06:34 AM
LS1Tech
Pontiac Firebird




Paid Advertisement
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
NA Meth Injection Dyno Results therabidweasel Dynamometer Results & Comparisons 66 11-09-2014 07:25 AM
2000 NBM Built Trans AM D1SC 700hp MrDavid Vehicle Classifieds 20 11-09-2011 11:43 AM
Procharged 403 wont pull past 5500 RPM.... b727pic PCM Diagnostics & Tuning 73 05-07-2011 08:07 PM
LS3 Vette Procharger Dyno, 752hp/662trq Big Turkey Dynamometer Results & Comparisons 11 01-31-2011 12:13 PM
solid roller LS3 stroker sheets aNuBiS Dynamometer Results & Comparisons 12 08-28-2008 12:25 AM


Tags
2001, 347, block, c5, chart, dyno, forged, hp, ls6, numbers, procharged, procharger, sale, short, z06


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



Join Ls1Tech

All times are GMT -5. The time now is 11:42 PM.


Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Advertising - Terms of Service - Privacy Statement - Terms of Service - JOBS
Emails & Contact Details